0213.200 Datasheet, PDF (1/2 Pages) Littelfuse – Axial Lead and Cartridge Fuses

Axial Lead and Cartridge Fuses
Designed to IEC Standard
5 x 20 mm Time Lag Fuse (Slo-Blo^®) Fuse 213 Series
• Designed to International (IEC) Standards for use globally.
• Meets the IEC 60127-2, Sheet 3 specification for Time Lag Fuses.
• Available in Cartridge and Axial Lead Form.
• Available in ratings of 0.200 to 6.3 amperes.
®
®
ELECTRICAL CHARACTERISTICS (213 Series):
% of Ampere
Rating
150%
Ampere
Rating
.032 – 6.3
8 - 15
Opening
Time
60 minutes, Minimum
30 minutes, Minimum
210%
275%
400%
1000%
.032 – 15
.032 – .100
.125 – 15
.032 – .100
.125 – 15
.032 – .100
.125 – 15
2 minutes, Maximum
0.2 sec., Min.; 10 sec. Max.
0.6 sec., Min.; 10 sec. Max.
.04 sec., Min.; 3 sec. Max.
.15 sec., Min.; 3 sec. Max.
.01 sec., Min.; 0.3 sec. Max.
0.02 sec., Min.; 0.3 sec. Max.
INTERRUPTING RATINGS: 35 amperes or 10 x rated current;
(whichever is greater) to a maximum 100A @ 250 VAC, unity power factor.
ORDERING INFORMATION:
Cartridge
Catalog
Number
0213.200
0213.250
0213.315
0213.400
0213.500
0213.630
0213.800
0213001.
02131.25
021301.6
0213002.
021302.5
02133.15
0213004.
0213005.
021306.3
213 Surge Withstand
Nominal
Ampere
Voltage Resistance
Rating
Rating Cold Ohms
.200
250
1.60
.250
250
1.05
.315
250
0.848
.400
250
0.535
.500
250
0.370
.630
250
0.275
.800
250
0.165
1
250
0.117
1.25
250
0.081
1.6
250
0.055
2
250
0.044
2.5
250
0.030
3.15
250
0.022
4
250
0.017
5
250
0.011
6.3
250
0.008
Nominal
Melting
I²t A²Sec.
0.350
0.555
1.14
1.35
2.90
4.80
9.42
19.20
27.15
44.2
92.7
138.0
226.5
202
314
600
ENVIRONMENTAL SPECIFICATIONS:
Operating temperature: -55˚C to 125˚C
Thermal Shock: MIL-STD-202F Method 107G, Test Condition B: (5
cycles –65°C to +125°C)
Vibration: MIL-STD-202F Method 201A
Humidity: MIL-STD-202F Method 103B, Test Condition A. high relative
humidity (95%) and elevated temperature (40°C) for 240 hours.
Salt Spray: MIL-STD-202F Method 101D, Test Condition B
PHYSICAL SPECIFICATIONS:
Material: Body: Glass
Cap: Nickel Plated Brass
Leads: Tin Plated Copper
Terminal Strength: MIL-STD-202F Method 211A,
Test Condition A
Solderability: Reference IEC 60127 Second Edition 2003-01 Annex A
Product Marking: Cap 1: current and voltage rating.
Cap 2: Agency approval markings.
11
Packaging: Available in Bulk (V=5, H=100, M=1000 pcs/pkg) or on
Tape/Reel (MRET1=1000 pcs/reel).
11
www.littelfuse.com
413