ASDL-3023 Datasheet, PDF (6/26 Pages) AVAGO TECHNOLOGIES LIMITED – IrDA Data Compliant Low Power 4Mbit/s with Remote Control Infrared Transceiver

Recommended Operating Conditions
Parameter
Operating Temperature
Supply Voltage
Input/Output Voltage
Logic Input Voltage for TXD,
SD/Mode
Receiver Input Irradiance
Logic High
Logic Low
Logic High
Symbol Min.
Typ.
T_A
-25
V_CC
2.4
IOV_CC 1.5
V_IH
IOVcc-0.5
V_IL
0
EI_H
0.0090
0.0225
Logic Low EI_L
IR LED (Logic High) Current
Pulse Amplitude – SIR Mode
I_LEDA
65
IR LED (Logic High) Current
Pulse Amplitude – MIR/FIR
Mode
I_LEDA
150
RC LED (Logic High) Current
Pulse Amplitude
I_LEDA
250
Receiver Data Rate
0.0096
Ambient Light
Max.
+85
3.6
3.6
IOVcc
0.4
500
500
0.3
Units Conditions
°C
V
V
V
V
mW/cm²
For in-band signals ≤
115.2kbit/s ^[3]
0.576 Mbit/s ≤ in-band
signals ≤ 4.0 Mbit/s ^[3]
mW/cm² For in-band signals ^[3]
mA
mA
mA
4.0
Mbit/s
See IrDA Serial Infrared
Physical Layer Link
Specification, Appendix A
for ambient levels
Note :
3. An in-band optical signal is a pulse/sequence where the peak wavelength, lp, is defined as 850 ≤ lp ≤ 900 nm, and the pulse characteristics are
compliant with the IrDA Serial Infrared Physical Layer Link Specification v1.4.