CNY17F-2 Datasheet, PDF (5/9 Pages) Lite-On Technology Corporation – High collector-emitter voltage

LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
ABSOLUTE MAXIMUM RATING
PARAMETER
Forward Current
INPUT
Reverse Voltage
Power Dissipation
Collector - Emitter Voltage
OUTPUT
Emitter - Collector Voltage
Collector Current
Collector Power Dissipation
Total Power Dissipation
*1 Isolation Voltage
Operating Temperature
Storage Temperature
*2 Soldering Temperature
SYMBOL
IF
VR
P
VCEO
VECO
IC
PC
Ptot
Viso
Topr
Tstg
Tsol
( Ta = 25°C )
RATING
UNIT
60
mA
6
V
100
mW
70
V
7
V
150
mA
150
mW
250
mW
5,000
Vrms
-55 ~ +100
°C
-55 ~ +150
°C
260
°C
*1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector,
emitter and base on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
*2. For 10 Seconds
Part No. : CNY17F-1 thru CNY17F-4 SERIES
BNS-OD-C131/A4
Page : 5 of 9