LTST-C150TGKT Datasheet, PDF (4/11 Pages) Lite-On Technology Corporation – Property of Lite-On Only

LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical Optical Characteristics At Ta=25℃
Parameter
Symbol
Part No.
LTST-
Min. Typ. Max. Unit Test Condition
Luminous Intensity
IV
C150TGKT 71.0 150.0
mcd
IF = 20mA
Note 1
Viewing Angle
2θ1/2 C150TGKT
130
deg Note 2 (Fig.6)
Peak Emission Wavelength
λP
C150TGKT
530
Dominant Wavelength
λd
C150TGKT
525
nm
Measurement
@Peak (Fig.1)
nm
IF = 20mA
Note 3
Spectral Line Half-Width
Δλ C150TGKT
35
nm
Forward Voltage
VF
C150TGKT 2.80 3.20 3.60
V
IF = 20mA
Reverse Current
IR
C150TGKT
10
μA
VR = 5V
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the
CIE eye-response curve.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the
single wavelength which defines the color of the device.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
Part No. : LTST-C150TGKT
BNS-OD-C131/A4
Page : 4 of 11