LTL-10233W-132A Datasheet, PDF (3/11 Pages) Lite-On Technology Corporation – Property of Lite-On Only

LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Electrical / Optical Characteristics at TA=25℃
Parameter
Luminous Intensity
Viewing Angle
Peak Emission Wavelength
Dominant Wavelength
Spectral Line Half-Width
Symbol
IV
2θ1/2
λP
λd
Δλ
Min. Typ. Max. Unit Test Condition
IF = 10mA
25
60
90 mcd
Note 1,4
60
deg Note 2 (Fig.6)
565
564 570
Measurement
nm
@Peak (Fig.1)
nm Note 3
30
nm
Forward Voltage
VF
2.1
2.6
V IF = 20mA
Reverse Current
IR
100 ^μA VR = 5V
Capacitance
C
35
pF VF = 0 , f = 1MHz
Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
(Commission International De L'Eclairage) eye-response curve.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.
4. The Iv guarantee should be added ±15%.
Part No. : LTL-10233W-132A
BNS-OD-C131/A4
Page : 3 of
11