LCCN-030X112 Datasheet, PDF (1/2 Pages) LinkCom Manufacturing Co., Ltd. – AC Input 90~305Vac SCP / OTP / OVP

Model NO.
Part NO.
LinkCom Manufacturing Co., Ltd
LCCN-030 112
Model Name
PLCCN0030 112
SIZE
Constant Current Power Supply
134 * 42 * 33.1 mm【5.28 * 1.65 * 1.3 inch】
Module : LCCN-030 112
*(8)
SPECIFICATION
MODEL
DC OUTPUT VOLTAGE (V)
* PRESET ACCURACY (%) *(7)
* OUTPUT CURRENT(A) *(5)
* O/P NOISE (P-P, V) *(3)
* LINE REGULATION (%) *(6)
LOAD REGULATION (%)
DC OUTPUT POWER
EFFICIENCY(typ @Full Load)
INPUT VOLTAGE RANGE
INPUT FREQUENCY
ACTIVE POWER FACTOR
INRUSH CURRENT (typ)
AC CURRENT
LEAKAGE CURRENT
SHORT CIRCUIT PROTECTION
OVER CURRENT PROTECTION
OVER V, PROTECTION
* OPERATING TEMP.*(4)
STORAGE TEMPERATURE
RELATIVE HUMIDITY
TEMP. COEFFICIENT
SAFETY
EMI
DIMENSIONS(L*W*H)
FEATURES
◆ AC Input 90~305Vac
◆ Protection: SCP / OVP / OCP
◆ High Operating ambient Temp: -20℃ ~ +60℃
◆ Power Factor:>0.95@115Vac;>0.9@230Vac;@full load
◆ Safety: PSE
◆ EMC: CE
◆ Comply with IndoorWaterproof
◆ Dimension (L*W*H): 134 * 42 * 33.1 mm
◆ Dimension (L*W*H): 5.28 * 1.65 * 1.3 inch
◆ ROHS Compliant
◆ Half-epoxy
*,# =SEE NOTES BELOW
LCCN-030 112
min.
norm.
max.
22
28
1
1.05
4
1
1
29.4 W
80%
90-305VAC, 127-431VDC, Normal：100-277VAC
Range:47-63Hz, Normal：50-60Hz
PF>0.95@115VAC , PF>0.9 @230VAC at full load and rated output voltage
COLD START 10A @ 230VAC
0.5A/115VAC 0.2A/230VAC
<0.7mA/240VAC
short circuit protection will restart automatically after the fault condition is removed
Constant Current
Shut down and latch off o/p voltage , re-power on to recover
-20 to +60℃@full load
-40 to +80℃
10 to +90%, non-cond.
0.03% / ℃ (0-50℃, typ)
PSE
CE EN55015
134 * 42 * 33.1 mm【5.28 * 1.65 * 1.3 inch】
NOTES：(1)All parameters not specially mentioned are measured 230VAC input.
(2)All specifications Typical @25℃, unless otherwise noted, at normal line and load.
(3)Ripple and Noise measured directly at pins/terminals at nom. load, 0.1uF bypass and 47uF electrolytic, pk-pk @20MHz bandwidth.
(4)Specified for free-air convection cooling.
(5)Minimum load is NOT required for proper operation .
(6)Line regulation measured from 100VAC to 277VAC.
(7)Preset accuracy measured at normal load, 120VAC input.
(8)100% Production Tested.
※Reference ^{www.linkcom.com.tw For more information, please contact with: [e-mail]}