|
60W-DBFE Datasheet, PDF (1/5 Pages) LinkCom Manufacturing Co., Ltd. – 0-10V Dimmable | |||
|
60-DBFE Series
www.linkcom.com.tw For more information, please contact with: sales@linkcom.com.tw
0-10V Dimmable
Constant Current Mode
PRODUCT SPECIFICATION
MODEL
FEATURES:
â AC Input 90~305 Vac Nominal
â Built-in Active Power Factor Correction
â Protection: SCP / OVP / OTP
â High Operating Ambient Temp.: -20â~+60â
â THD: <20% @ 277VAC Full Load
â Surge Protection: L-N 1 kV, L/N-FG 2 kV
â Safety: UL
â EMI: Meets CE / Meets FCC
â Comply with Indoor/Outdoor Waterproof (IP 67)
â Warranty: 3 years (refer to LinkCom warranty policy)
â 0-10V dimming
â RoHS Compliant
DC OUTPUT
POWER(W)
DC OUTPUT
VOLTAGE(V)
OUTPUT
CURRENT(A)
OUTPUT
CURRENT
TOLERANCE
EFFICIENCY
O/P NOISE
(pk-pk,V)
DBFE0060U132
DBFE0060U142
DBFE0060U152
DBFE0060U172
DBFE0060U212
DBFE0060U252
DBFE0050U432
62.4
42-48V
1.3
58.8
33-42V
1.4
60.0
30-40V
1.5
61.2
30-36V
1.7
63.0
24-30V
2.1
60.0
19-24V
2.5
51.6
9-12V
4.3
±5%
86%
4.6V
±5%
86%
4.2V
±5%
86%
4V
±5%
86%
3.6V
±5%
86%
3.6V
±5%
86%
2.7V
±5%
82%
2V
ELECTRICAL SPECIFICATION
INPUT VOLTAGE RANGE
90-305 Vac, 127-431 Vdc, Normal: 100-277 Vac
INPUT FREQUENCY
Range: 47-63Hz, Normal: 50-60Hz
ACTIVE POWER FACTOR
> 0.95 @ 110 Vac; > 0.9 @ 230 Vac
THD
< 20% at Full Load 100-277 Vac
TURN ON DELAY TIME
3000 ms at Full Load 115 Vac / 230 Vac
AC CURRENT
0.8 A / 110 Vac; 0.4 A / 230 Vac
INRUSH CURRENT (typ)
Cold Start 50 A @ 230 Vac
LEAKAGE CURRENT
< 0.75 mA at 277 Vac
SHORT CIRCUIT PROTECTION
OVER VOLTAGE PROTECTION
automatically after the fault condition is removed
OVER TEMP. PROTECTION
OPERATING TEMP.
-20â ~ +60 â @ Full Load 110-277 Vac
STORAGE TEMP.
-40 â ~ +80 â
RELATIVE HUMIDITY
10% to +90%, non-cond.
SAFETY
UL 8750
EMI
Meets FCC Part15 / Meets EN 55015
WITHSTAND VOLTAGE
I/P-O/Pï¼4242 Vdc, I/P-FGï¼2500 Vdc,I/P-CASE : 2500 Vdc
ISOLATION RESISTANCE
I/P-O/P, I/P-FG,O/P-FG : >10M Ω / 500 Vdc / 25â / 70% RH
DIMENSION (L*W*H)
158 * 58 * 39.4 mmã6.22 * 2.28 * 1.55 inchã
(1) All parameters specified at 230 Vac input unless otherwise noted.
(2) All specifications Typical at 25â, unless otherwise noted, at normal line and load.
(3) Ripple and Noise measured directly at pins/terminals at nom. load, pk-pk at 20MHz bandwidth.
(4) Specified for free-air convection cooling.
(5) Minimum load is NOT required for proper operation .
(6) 100% Production Tested.
ï¼REFERENCE: www.linkcom.com.tw
ï¼Please contact sales@linkcom.com.tw, sales@linkcomusa.com for more information
Linkcom Manufacturing Co., Ltd.
5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ⪠T: +886-2-8919-1380 ⪠F: +886-2-8919-1370 ⪠www.linkcom.com.tw
|
▷ |