10W-BPH Datasheet, PDF (1/3 Pages) LinkCom Manufacturing Co., Ltd. – 10W LED Driver

10W-BPH Series
www.linkcom.com.tw For more information, please contact with: [e-mail]
10W LED Driver
Constant Current Mode
PRODUCT SPECIFICATION
MODEL
BPHE010C201-50
BPHE010C251-50
BPHE010C301-50
BPHE010C351-50
BPHE010C401-50
BPHE010C451-50
BPHE010C501-50
BPHE010C601-50
BPHE010C701-50
BPHE010C751-50
BPHE010C801-50
FEATURES:
● AC Input 90~264 Vac Nominal
● AC Inrush current: 40 A at 240 Vac Cold start
● Protection: SCP / OVP / OTP
● High Operating Ambient Temp.: -20℃ ~ +60℃
● Surge Protection: L-N 0.5 kV
● Safety: UL 1310 / PSE
● EMI: CE / Meets FCC
● Comply with Indoor/Outdoor Waterproof (IP 67)
● Warranty: 2 years (refer to LinkCom warranty policy)
● RoHS Compliant
DC OUTPUT
POWER(W)
9.6
10
10.88
10.5
10
10.8
10
10.2
10.5
9.75
9.6
DC OUTPUT
VOLTAGE(V)
3-48
3-40
3-34
3-30
3-25
3-24
3-20
3-17
3-15
3-13
3-12
OUTPUT
CURRENT(mA)
216-264
234-286
288-352
333-407
369-451
414-506
459-561
549-671
636-781
684-836
729-891
OUTPUT
CURRENT
TOLERANCE
─
─
─
─
─
─
─
─
─
─
─
EFFICIENCY O/P NOISE(P-P,V)
70%
0.25
70%
0.25
70%
0.25
70%
0.25
70%
0.25
70%
0.25
70%
0.25
70%
0.25
70%
0.25
70%
0.25
70%
0.25
ELECTRICAL SPECIFICATION
INPUT VOLTAGE RANGE
90-264 Vac, 127-373 Vdc, Normal: 100-240 Vac
INPUT FREQUENCY
Range: 47-63 Hz, Normal: 50-60 Hz
ACTIVE POWER FACTOR
NA
THD
NA
TURN ON DELAY TIME
3200ms, 2000ms at full load 115 Vac / 230 Vac
AC CURRENT
<0.3 A 110 Vac; <0.15A 230 Vac
INRUSH CURRENT (typ)
Cold Start 40 A at 240 Vac
LEAKAGE CURRENT
< 0.7 mA / 264 Vac
SHORT CIRCUIT PROTECTION
SCP will restart automatically after the fault condition is removed
OVER VOLTAGE PROTECTION
OVP will restart automatically after the fault condition is removed
OVER TEMP. PROTECTION
OTP will restart automatically after the fault condition is removed
OVER CURRENT PROTECTION
NA
OPERATING TEMP.
-20 ℃ ~ +60 ℃
STORAGE TEMP.
-40 ℃ ~ +80 ℃
RELATIVE HUMIDITY
10% to +90%, non-cond.
SAFETY
UL 1310 / PSE
EMI
EN55015 / Meets FCC Part15
WITHSTAND VOLTAGE
I/P-O/P：4.242 kVdc I/P-CASE:4 kVdc
ISOLATION RESISTANCE
I/P-O/P :100M Ω / 500 Vdc / 25℃ / 70% RH
DIMENSION (L*W*H)
97.5 * 40 * 30.5 mm【3.84 * 1.57 * 1.2 inch】
(1) All parameters specified at 230 Vac input unless otherwise noted.
(2) All specifications typical at 25℃, unless otherwise noted, at normal line and load.
(3) Ripple and noise measured directly at pins/terminals at nom. load, 0.1uF bypass and 47uF electrolytic, pk-pk at 20MHz bandwidth.
(4) Specified for free-air convection cooling.
(5) Minimum load is NOT required for proper operation .
(6) 100% Production tested.
＊REFERENCE: www.linkcom.com.tw
＊Please contact [e-mail], [e-mail] for more information
Linkcom Manufacturing Co., Ltd.
5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: [phone] ▪ F: [phone] ▪ www.linkcom.com.tw