LTP5902-IPM_15 Datasheet, PDF (7/32 Pages) Linear Technology – SmartMesh IP Node 2.4GHz 802.15.4e Wireless Mote Module

LTP5901-IPM/LTP5902-IPM
Radio Transmitter Characteristics The l denotes the specifications which apply over the
full operating temperature range, otherwise specifications are at T_A = 25°C and VSUPPLY = 3.6V unless otherwise noted.
PARAMETER
CONDITIONS
MIN TYP MAX
UNITS
Output Power
High Calibrated Setting
Low Calibrated Setting
Delivered to a 50Ω load
8
dBm
0
dBm
Spurious Emissions
Conducted Measurement with a 50Ω Single-Ended Load,
+8dBm Output Power. All Measurements Made with Max
Hold.
30MHz to 1000MHz
1GHz to 12.75GHz
2.4GHz ISM Upper Band Edge (Peak)
2.4GHz ISM Upper Band Edge (Average)
2.4GHz ISM Lower Band Edge
Harmonic Emissions
2nd Harmonic
3rd Harmonic
R_BW = 120kHz, V_BW = 100Hz
R_BW = 1MHz, V_BW = 3MHz
R_BW = 1MHz, V_BW = 3MHz
R_BW = 1MHz, V_BW = 10Hz
R_BW = 100kHz, V_BW = 100kHz
Conducted Measurement Delivered to a 50Ω Load,
Resolution Bandwidth = 1MHz, Video Bandwidth = 1MHz
<–70
dBm
–45
dBm
–37
dBm
–49
dBm
–45
dBc
–50
dBm
–45
dBm
Digital I/O Characteristics The l denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T_A = 25°C and VSUPPLY = 3.6V unless otherwise noted.
SYMBOL PARAMETER
CONDITIONS (Note 7)
MIN TYP MAX
UNITS
V_IL
Low Level Input Voltage
l –0.3
0.6
V
V_IH
High Level Input Voltage
(Note 8)
l VSUPPLY
VSUPPLY
V
– 0.3
+ 0.3
V_OL
Low Level Output Voltage
Type 1, I_OL(MAX) = 1.2mA
l
0.4
V
V_OH
High Level Output Voltage
Type 2, Low Drive, I_OL(MAX) = 2.2mA
Type 2, High Drive, I_OL(MAX) = 4.5mA
Type 1, I_OH(MAX) = –0.8mA
l
0.4
V
l
0.4
V
l VSUPPLY
VSUPPLY
V
– 0.3
+ 0.3
Type 2, Low Drive, I_OH(MAX) = –1.6mA
l VSUPPLY
VSUPPLY
V
– 0.3
+ 0.3
Type 2, High Drive, I_OH(MAX) = –3.2mA
l VSUPPLY
VSUPPLY
V
– 0.3
+ 0.3
Input Leakage Current
Input Driven to VSUPPLY or GND
50
nA
Pull-Up/Pull-Down Resistance
50
kΩ
For more information www.linear.com/LTP5901-IPM or www.linear.com/LTP5902-IPM
59012ipmf
7