LT1363_15 Datasheet, PDF (5/12 Pages) Linear Technology – 70MHz, 1000V/s Op Amp

LT1363
ELECTRICAL CHARACTERISTICS
Note 1: Absolute Maximum Ratings are those values beyond which the life
of a device may be impaired.
Note 2: Differential inputs of ±10V are appropriate for transient operation
only, such as during slewing. Large, sustained differential inputs will cause
excessive power dissipation and may damage the part. See Input
Considerations in the Applications Information section of this data sheet
for more details.
Note 3: A heat sink may be required to keep the junction temperature
below absolute maximum when the output is shorted indefinitely.
Note 4: Input offset voltage is pulse tested and is exclusive of warm-up drift.
Note 5: Slew rate is measured between ±10V on the output with ±6V input
for ±15V supplies and ±2V on the output with ±1.75V input for ±5V supplies.
Note 6: Full power bandwidth is calculated from the slew rate
measurement: FPBW = SR/2πV_P.
Note 7: This parameter is not 100% tested.
Note 8: The LT1363C is guaranteed functional over the operating
temperature range of –40°C to 85°C.
Note 9: The LT1363C is guaranteed to meet specified performance from
0°C to 70°C. The LT1363C is designed, characterized and expected to
meet specified performance from – 40°C to 85°C, but is not tested or QA
sampled at these temperatures. For guaranteed I-grade parts, consult the
factory.
TYPICAL PERFORMANCE CHARACTERISTICS
Supply Current vs Supply Voltage
and Temperature
10
8
125°C
25°C
6
– 55°C
4
2
0
0
5
10
15
20
SUPPLY VOLTAGE (±V)
1363 G01
Input Bias Current vs
Temperature
1.4
1.2
  ^{VS =}
I_B =
±15V
—I^B—+ ^+—IB—–
2
1.0
0.8
0.6
0.4
0.2
0
– 50 –25
0 25 50 75
TEMPERATURE (°C)
100 125
1363 G04
Input Common Mode Range vs
Supply Voltage
V⁺
– 0.5
T_A = 25°C
∆V_OS < 1mV
–1.0
–1.5
–2.0
2.0
1.5
1.0
0.5
V^–
0
5
10
15
SUPPLY VOLTAGE (±V)
20
1363 G02
Input Noise Spectral Density
100
10
V_S = ±15V
T_A = 25°C
A_V = 101
R_S = 100k
i_n
e_n
10
1
1
0.1
10
100
1k
10k
100k
FREQUENCY (Hz)
1363 G05
Input Bias Current vs
Input Common Mode Voltage
1.0
V_S = ±15V
0.8
  ^{TA =}
I_B =
25°C
—I^{B+—+—IB}—–
2
0.6
0.4
0.2
–15 –10 –5 0
5 10 15
INPUT COMMON MODE VOLTAGE (V)
1363 G03
Open-Loop Gain vs
Resistive Load
85
T_A = 25°C
80
V_S = ±15V
75
V_S = ±5V
70
65
60
10
100
1k
LOAD RESISTANCE (Ω)
10k
1363 G06
5