LT1014_15 Datasheet, PDF (24/26 Pages) Linear Technology – Quad Precision Op Amp

LT1013/LT1014
Package Description
S6 Package
6-Lead Plastic TSOT-23
(Reference LTC DWG # 05-08-1636)
.050 BSC
.045 ±.005
.245
MIN
.160 ±.005
.010
(0.254
–
–
.020
0.508)
s
45°
.008 – .010
(0.203 – 0.254)
.016 – .050
(0.406 – 1.270)
0°– 8° TYP
.030 ±.005
TYP
RECOMMENDED SOLDER PAD LAYOUT
.228 – .244
.053 – .069
(5.791 – 6.197)
(1.346 – 1.752)
.004 – .010
(0.101 – 0.254)
NOTE:
1. DIMENSIONS
IN
INCHES
(MILLIMETERS)
.014 – .019
(0.355 – 0.483)
TYP
2. DRAWING NOT TO SCALE
3. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
.050
(1.270)
BSC
.189 – .197
(4.801 – 5.004)
NOTE 3
8
7
6
5
.150 – .157
(3.810 – 3.988)
NOTE 3
1
2
34
SO8 0303
SW Package
XX-Lead Plastic Small Outline (Wide .300 Inch)
(Reference LTC DWG # 05-08-1620)
.005
(0.127)
RAD MIN
.291 – .299
(7.391 – 7.595)
NOTE 4
.010
(0.254
–
–
.029
0.737)
s
45°
.009 – .013
(0.229 – 0.330)
NOTE 3
.016 – .050
(0.406 – 1.270)
.030 ±.005
TYP
N
.050 BSC .045 ±.005
.398 – .413
(10.109 – 10.490)
NOTE 4
.420
MIN
.325 ±.005
16 15 14 13 12 11 10 9
0° – 8° TYP
N
123
N/2
RECOMMENDED SOLDER PAD LAYOUT
NOTE 3
.093 – .104
(2.362 – 2.642)
.037 – .045
(0.940 – 1.143)
.394 – .419
(10.007 – 10.643)
N/2
123 45678
.050
(1.270)
NOTE:
1. DIMENSIONS
IN
INCHES
(MILLIMETERS)
BSC _{.014 – .019}
(0.356 – 0.482)
2. DRAWING NOT TO SCALE
TYP
3. PIN 1 IDENT, NOTCH ON TOP AND CAVITIES ON THE BOTTOM OF PACKAGES ARE THE MANUFACTURING OPTIONS.
THE PART MAY BE SUPPLIED WITH OR WITHOUT ANY OF THE OPTIONS
4. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
.004 – .012
(0.102 – 0.305)
24
S16 (WIDE) 0502
10134fd