LTC4055-1_15 Datasheet, PDF (23/24 Pages) Linear Technology – USB Power Controller and Li-Ion Charger

LTC4055/LTC4055-1
PACKAGE DESCRIPTION
UF Package
16-Lead Plastic QFN (4mm × 4mm)
(Reference LTC DWG # 05-08-1692)
0.72 ±0.05
4.35 ± 0.05
2.15 ± 0.05
2.90 ± 0.05 ^{(4 SIDES)}
PACKAGE OUTLINE
0.30 ±0.05
0.65 BSC
RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS
4.00 ± 0.10
(4 SIDES)
PIN 1
TOP MARK
(NOTE 6)
0.75 ± 0.05
2.15 ± 0.10
(4-SIDES)
BOTTOM VIEW—EXPOSED PAD
R = 0.115
TYP
15 16
PIN 1 NOTCH R = 0.20 TYP
OR 0.35 × 45° CHAMFER
0.55 ± 0.20
1
2
0.200 REF
0.00 – 0.05
NOTE:
1. DRAWING CONFORMS TO JEDEC PACKAGE OUTLINE MO-220 VARIATION (WGGC)
2. DRAWING NOT TO SCALE
3. ALL DIMENSIONS ARE IN MILLIMETERS
4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE
MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE
5. EXPOSED PAD SHALL BE SOLDER PLATED
6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION
ON THE TOP AND BOTTOM OF PACKAGE
(UF16) QFN 1004
0.30 ± 0.05
0.65 BSC
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-
tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
4055fb
23