LT4356MP-1_15 Datasheet, PDF (21/24 Pages) Linear Technology – Surge Stopper

LT4356MP-1/LT4356MP-2
PACKAGE DESCRIPTION
Please refer to http://www.linear.com/designtools/packaging/ for the most recent package drawings.
MS Package
10-Lead Plastic MSOP
(Reference LTC DWG # 05-08-1661)
0.889 ± 0.127
(.035 ± .005)
5.23
(.206)
MIN
3.20 – 3.45
(.126 – .136)
0.305 ± 0.038
(.0120 ± .0015)
TYP
0.50
(.0197)
BSC
RECOMMENDED SOLDER PAD LAYOUT
3.00 ± 0.102
(.118 ± .004)
(NOTE 3)
10 9 8 7 6
0.497 ± 0.076
(.0196 ± .003)
REF
0.254
(.010)
DETAIL “A”
0° – 6° TYP
4.90 ± 0.152
(.193 ± .006)
3.00 ± 0.102
(.118 ± .004)
(NOTE 4)
GAUGE PLANE
12345
0.18
(.007)
0.53 ± 0.152
(.021 ± .006)
DETAIL “A”
1.10
(.043)
MAX
SEATING
PLANE _{0.17 – 0.27}
NOTE:
1. DIMENSIONS IN MILLIMETER/(INCH)
(.007 – .011)
TYP
0.50
(.0197)
BSC
2. DRAWING NOT TO SCALE
3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX
0.86
(.034)
REF
0.1016 ± 0.0508
(.004 ± .002)
MSOP (MS) 0307 REV E
4356mp12fb
21