LTC3543_15 Datasheet, PDF (19/20 Pages) Linear Technology – 600mA Synchronous Step Down Buck Regulator with PLL, Soft-Start and Spread Spectrum

PACKAGE DESCRIPTION
DCB Package
6-Lead Plastic DFN (2mm × 3mm)
(Reference LTC DWG # 05-08-1715 Rev A)
LTC3543
0.70 p0.05
3.55 p0.05
1.65 p0.05
(2 SIDES)
2.15 p0.05
PACKAGE
OUTLINE
0.25 p 0.05
0.50 BSC
1.35 p0.05
(2 SIDES)
RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS
2.00 p0.10
(2 SIDES)
R = 0.115
R = 0.05
TYP
TYP
4
0.40 p 0.10
6
PIN 1 BAR
TOP MARK
(SEE NOTE 6)
0.200 REF
3.00 p0.10 1.65 p 0.10
(2 SIDES) (2 SIDES)
0.75 p0.05
0.00 – 0.05
PIN 1 NOTCH
R0.20 OR 0.25
s 45o CHAMFER
3
1
(DCB6) DFN 0405
0.25 p 0.05
0.50 BSC
1.35 p0.10
(2 SIDES)
BOTTOM VIEW—EXPOSED PAD
NOTE:
1. DRAWING TO BE MADE A JEDEC PACKAGE OUTLINE M0-229 VARIATION OF (TBD)
2. DRAWING NOT TO SCALE
3. ALL DIMENSIONS ARE IN MILLIMETERS
4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE
MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE
5. EXPOSED PAD SHALL BE SOLDER PLATED
6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION ON THE
TOP AND BOTTOM OF PACKAGE
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-
tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
3543fa
19