LTC1403 Datasheet, PDF (18/20 Pages) Linear Technology – Serial 12-Bit/14-Bit, 2.8Msps Sampling ADCs with Shutdown

LTC1403/LTC1403A
APPLICATIO S I FOR ATIO
; All other vector locations are free to use. When programming always be sure
; the HPIINT bit is unmasked (IMR=200h) to allow the communications kernel and
; host PC interact. INT2 should normally be masked (IMR(bit 2) = 0) so that the
; DSP will not interrupt itself during a HINT. HINT is tied to INT2 externally.
;
;
;
.title "Vector Table"
.mmregs
reset
nmi
trap2
int0
int1
int2
tint
brint
bxint
trint
txint
int3
hpiint
goto #80h
nop
nop
return_enable
nop
nop
nop
goto #88h
nop
nop
.space 52*16
return_enable
nop
nop
nop
return_enable
nop
nop
nop
return_enable
nop
nop
nop
return_enable
nop
nop
nop
goto breceive
nop
nop
nop
goto bsend
nop
nop
nop
return_enable
nop
nop
nop
return_enable
nop
nop
return_enable
nop
nop
nop
dgoto #0e4h
nop
nop
.space 24*16
;00; RESET * DO NOT MODIFY IF USING DEBUGGER *
;04; non-maskable external interrupt
;08; trap2 * DO NOT MODIFY IF USING DEBUGGER *
;0C-3F: vectors for software interrupts 18-30
;40; external interrupt int0
;44; external interrupt int1
;48; external interrupt int2
;4C; internal timer interrupt
;50; BSP receive interrupt
;54; BSP transmit interrupt
;58; TDM receive interrupt
;5C; TDM transmit interrupt
;60; external interrupt int3
;64; HPIint * DO NOT MODIFY IF USING DEBUGGER *
;68-7F; reserved area
18
1403af