LT1767-5_15 Datasheet, PDF (18/20 Pages) Linear Technology – Monolithic 1.5A, 1.25MHz Step-Down Switching Regulators

LT1767/LT1767-1.8/
LT1767-2.5/LT1767-3.3/LT1767-5
PACKAGE DESCRIPTION
Please refer to http://www.linear.com/designtools/packaging/ for the most recent package drawings.
MS8E Package
8-Lead Plastic MSOP, Exposed Die Pad
(Reference LTC DWG # 05-08-1662 Rev K)
BOTTOM VIEW OF
EXPOSED PAD OPTION
1.88
1
(.074)
0.29
1.88 ±0.102
(.074 ±.004)
0.889 ±0.127
(.035 ±.005)
1.68
REF
(.066)
5.10
(.201)
MIN
1.68 ±0.102 3.20 – 3.45
(.066 ±.004) (.126 – .136)
0.42 ±0.038
(.0165 ±.0015)
TYP
0.65
(.0256)
BSC
RECOMMENDED SOLDER PAD LAYOUT
3.00 ±0.102
(.118 ±.004)
(NOTE 3)
8
8 7 65
0.05 REF
DETAIL “B”
DETAIL “B”
CORNER TAIL IS PART OF
THE LEADFRAME FEATURE.
FOR REFERENCE ONLY
NO MEASUREMENT PURPOSE
0.52
(.0205)
REF
0.254
(.010)
DETAIL “A”
0° – 6° TYP
4.90 ±0.152
(.193 ±.006)
3.00 ±0.102
(.118 ±.004)
(NOTE 4)
GAUGE PLANE
0.18
(.007)
0.53 ±0.152
(.021 ±.006)
DETAIL “A”
1 234
1.10
(.043)
MAX
SEATING
PLANE _{0.22 – 0.38}
NOTE:
1. DIMENSIONS IN MILLIMETER/(INCH)
(.009 – .015)
TYP
0.65
(.0256)
BSC
2. DRAWING NOT TO SCALE
3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX
6. EXPOSED PAD DIMENSION DOES INCLUDE MOLD FLASH. MOLD FLASH ON E-PAD
SHALL NOT EXCEED 0.254mm (.010") PER SIDE.
0.86
(.034)
REF
0.1016 ±0.0508
(.004 ±.002)
MSOP (MS8E) 0213 REV K
18
For more information www.linear.com/LT1767
1767fb