LTC3407-4 Datasheet, PDF (15/16 Pages) Linear Technology – Dual Synchronous, 800mA, 2.25MHz Step-Down DC/DC Regulator

LTC3407-4
PACKAGE DESCRIPTIO
MSE Package
10-Lead Plastic MSOP
(Reference LTC DWG # 05-08-1664)
2.794 ± 0.102
(.110 ± .004)
0.889 ± 0.127
(.035 ± .005)
BOTTOM VIEW OF
EXPOSED PAD OPTION
2.06 ± 0.102
1
(.081 ± .004)
1.83 ± 0.102
(.072 ± .004)
5.23
(.206)
MIN
2.083 ± 0.102 3.20 – 3.45
(.082 ± .004) (.126 – .136)
0.305 ± 0.038
(.0120 ± .0015)
TYP
0.50
(.0197)
BSC
RECOMMENDED SOLDER PAD LAYOUT
3.00 ± 0.102
(.118 ± .004)
(NOTE 3)
10
10 9 8 7 6
0.497 ± 0.076
(.0196 ± .003)
REF
0.254
(.010)
GAUGE PLANE
DETAIL “A”
0° – 6° TYP
4.90 ± 0.152
(.193 ± .006)
3.00 ± 0.102
(.118 ± .004)
(NOTE 4)
12345
0.53 ± 0.152
(.021 ± .006)
DETAIL “A”
1.10
(.043)
MAX
0.18
(.007)
SEATING
PLANE _{0.17 – 0.27}
NOTE:
1. DIMENSIONS IN MILLIMETER/(INCH)
(.007 – .011)
TYP
0.50
(.0197)
BSC
2. DRAWING NOT TO SCALE
3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX
0.86
(.034)
REF
0.127 ± 0.076
(.005 ± .003)
MSOP (MSE) 0603
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
34074f
15