LTC1068-200CG Datasheet, PDF (15/30 Pages) Linear Technology – Clock-Tunable, Quad Second Order, Filter Building Blocks

LTC1068 Series
APPLICATIONS INFORMATION
supply inputs to the board. Jumpers JPA to JPD on the
board configure the filter’s second order circuit modes,
jumper JP1 configures the filter for dual or single supply
operation and jumpers JP2 (A-D) to JP3 (A-D) configure
the op amp buffers as inverting or noninverting. Surface
mount pads are available on the board for 1206 size sur-
face mount resistors. The printed circuit layout of DC104
is arranged so that most of the resistor connections for
one 8th order filter or two 4th order filters are available
on the board. A resistor makes a connection between two
filter nodes on the board and for most filter designs, no
wiring is required.
DC104 Component Side Silkscreen
DC104 Component Side
DC104 Solder Side
1068fc
15