LTC1064-7_09 Datasheet, PDF (15/16 Pages) Linear Technology – Linear Phase, 8th Order Lowpass Filter

PACKAGE DESCRIPTIO
.030 ±.005
TYP
N
SW Package
16-Lead Plastic Small Outline (Wide .300 Inch)
(Reference LTC DWG # 05-08-1620)
.050 BSC .045 ±.005
.398 – .413
(10.109 – 10.490)
NOTE 4
16 15 14 13 12 11 10 9
LTC1064-7
N
.420
.325 ±.005
MIN
NOTE 3
.394 – .419
(10.007 – 10.643)
123
N/2
RECOMMENDED SOLDER PAD LAYOUT
.005
(0.127)
RAD MIN
.291 – .299
(7.391 – 7.595)
NOTE 4
.010
(0.254
–
–
.029
0.737)
×
45°
0° – 8° TYP
N/2
123 45678
.093 – .104
(2.362 – 2.642)
.037 – .045
(0.940 – 1.143)
.050
.009 – .013
(0.229 – 0.330)
NOTE 3
.016 – .050
(0.406 – 1.270)
NOTE:
1. DIMENSIONS
IN
INCHES
(MILLIMETERS)
(1.270)
BSC _{.014 – .019}
(0.356 – 0.482)
TYP
2. DRAWING NOT TO SCALE
3. PIN 1 IDENT, NOTCH ON TOP AND CAVITIES ON THE BOTTOM OF PACKAGES ARE THE MANUFACTURING OPTIONS.
THE PART MAY BE SUPPLIED WITH OR WITHOUT ANY OF THE OPTIONS
4. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
.004 – .012
(0.102 – 0.305)
S16 (WIDE) 0502
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
10647fb
15