LT1058_15 Datasheet, PDF (15/16 Pages) Linear Technology – Dual and Quad, JFET Input Precision High Speed Op Amps

PACKAGE DESCRIPTION
N Package
8-Lead PDIP (Narrow .300 Inch)
(Reference LTC DWG # 05-08-1510 Rev I)
LT1057/LT1058
.300 – .325
(7.620 – 8.255)
.400*
(10.160)
MAX
8
7
6
5
.008 – .015
(0.203 – 0.381)
+.035
.325 _–.015
( ) ^8.255
+0.889
–0.381
.255 ±.015*
(6.477 ±0.381)
12
34
NOTE:
1. DIMENSIONS
ARE
INCHES
MILLIMETERS
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .010 INCH (0.254mm)
.045 – .065
(1.143 – 1.651)
.065
(1.651)
TYP
.100
(2.54)
BSC
N Package
14-Lead PDIP (Narrow .300 Inch)
(Reference LTC DWG # 05-08-1510 Rev I)
.130 ±.005
(3.302 ±0.127)
.120
(3.048)
MIN
.018 ±.003
(0.457 ±0.076)
.020
(0.508)
MIN
N8 REV I 0711
.300 – .325
(7.620 – 8.255)
.770*
(19.558)
MAX
14 13 12 11 10 9
8
.008 – .015
(0.203 – 0.381)
.255 ±.015*
(6.477 ±0.381)
+.035
.325 _–.015
( ) ^8.255
+0.889
–0.381
1
2
3
4
5
6
7
NOTE:
1. DIMENSIONS
ARE
INCHES
MILLIMETERS
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .010 INCH (0.254mm)
.130 ±.005
(3.302 ±0.127)
.020
(0.508)
MIN
.120
(3.048)
MIN
.045 – .065
(1.143 – 1.651)
.005
(0.127) _.100
MIN _(2.54)
BSC
S8 Package
8-Lead Plastic Small Outline (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1610 Rev G)
.065
(1.651)
TYP
.018 ±.003
(0.457 ±0.076)
N14 REV I 0711
.050 BSC
.045 ±.005
.189 – .197
(4.801 – 5.004)
NOTE 3
8
7
6
5
.245
MIN
.160 ±.005
.228 – .244
(5.791 – 6.197)
.150 – .157
(3.810 – 3.988)
NOTE 3
.053 – .069
(1.346 – 1.752)
.030 ±.005
TYP
RECOMMENDED SOLDER PAD LAYOUT
1
2
34
NOTE:
1. DIMENSIONS
IN
INCHES
(MILLIMETERS)
2. DRAWING NOT TO SCALE
3. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
4. PIN 1 CAN BE BEVEL EDGE OR A DIMPLE
.014 – .019
(0.355 – 0.483)
TYP
.004 – .010
(0.101 – 0.254)
.010
(0.254
–
–
.020
0.508)
×
45°
.008 – .010
(0.203 – 0.254)
.050
(1.270)
BSC
.016 – .050
(0.406 – 1.270)
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-
tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
0°– 8° TYP
SO8 REV G 0212
10578fd
15