LTC3535_15 Datasheet, PDF (14/16 Pages) Linear Technology – Dual Channel 550mA 1MHz Synchronous Step-Up DC/DC Converter

LTC3535
PACKAGE DESCRIPTION
DC Package
12-Lead Plastic DFN (3mm × 3mm)
(Reference LTC DWG # 05-08-1725 Rev A)
0.70 ± 0.05
3.50 ± 0.05
2.10 ± 0.05
2.38 ± 0.05
1.65 ± 0.05
PACKAGE
OUTLINE
0.25 ± 0.05
0.45 BSC
2.25 REF
RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS
APPLY SOLDER MASK TO AREAS THAT ARE NOT SOLDERED
R = 0.115
TYP
7
0.40 ± 0.10
12
PIN 1
TOP MARK
(SEE NOTE 6)
0.200 REF
3.00 ± 0.10
(4 SIDES)
0.75 ± 0.05
0.00 – 0.05
2.38 ± 0.10
1.65 ± 0.10
PIN 1 NOTCH
R = 0.20 OR
0.25 × 45°
6
1
CHAMFER
0.23 ± 0.05
0.45 BSC
2.25 REF
(DD12) DFN 0106 REV A
BOTTOM VIEW—EXPOSED PAD
NOTE:
1. DRAWING IS NOT A JEDEC PACKAGE OUTLINE
2. DRAWING NOT TO SCALE
3. ALL DIMENSIONS ARE IN MILLIMETERS
4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE
MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE
5. EXPOSED PAD AND TIE BARS SHALL BE SOLDER PLATED
6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION ON THE
TOP AND BOTTOM OF PACKAGE
3535fa
14