|
LTC6994-1 Datasheet, PDF (13/24 Pages) Linear Technology – TimerBlox: Delay Block/ Debouncer | |||
|
◁ |
LTC6994-1/LTC6994-2
OPERATION
LTC6994-2 Functionality
Figures 5 details the basic operation of the LTC6994-2
when configured for noninverting operation (POL = 0). As
before, a rising edge on the IN pin initiates the timing and,
if IN remains high, OUT will transition high after tDELAYâ.
Unlike the LTC6994-1, falling edges are delayed in the
same way. When IN transitions low, OUT will follow after
tDELAYâ.
If the input doesnât remain high or low long enough for OUT
to follow, the timing will restart on the next transition.
Also unlike the LTC6994-1, the output pulse width can
never be less than tDELAYâ. Therefore, the LTC6994-2 can
generate pulses with a defined minimum width.
Figure 6 details the operation of the LTC6994-2 when the
output is inverted (POL = 1).
IN
tPD
OUT
tDELAY
tPD
tDELAY
tPD tPD
tDELAY
tWIDTH
tPD
tDELAY
699412 F05
Figure 5. Both Edges Delayed Timing Diagram (LTC6994-2, POL = 0)
tWIDTH
IN
tPD
tPD
tPD tPD
tPD
OUT
699412 F06
tDELAY
tDELAY
tDELAY
tDELAY
Figure 6. Both Edges Delayed (Inverting) Timing Diagram (LTC6994-2, POL = 1)
699412f
13
|
▷ |