LT6600-2.5_15 Datasheet, PDF (13/16 Pages) Linear Technology – Very Low Noise, Differential Amplifi er and 2.5MHz Lowpass Filter

PACKAGE DESCRIPTION
DF Package
12-Lead Plastic DFN (4mm × 4mm)
(Reference LTC DWG # 05-08-1733 Rev Ø)
2.50 REF
0.70 ±0.05
4.50 ± 0.05
3.10 ± 0.05
3.38 ±0.05
2.65 ± 0.05
LT6600-2.5
PACKAGE OUTLINE
0.25 ±0.05
0.50 BSC
RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS
APPLY SOLDER MASK TO AREAS THAT ARE NOT SOLDERED
4.00 ± 0.10
(4 SIDES)
7
2.50 REF
12
0.40 ± 0.10
3.38 ±0.10
2.65 ± 0.10
PIN 1
TOP MARK
(NOTE 6)
0.200 REF
0.75 ± 0.05
6
R = 0.115
TYP
PIN 1 NOTCH
R = 0.20 TYP OR
0.35 × 45°
CHAMFER
(DF12) DFN 0806 REV Ø
1
0.25 ± 0.05
0.50 BSC
BOTTOM VIEW—EXPOSED PAD
0.00 – 0.05
NOTE:
1. DRAWING IS PROPOSED TO BE MADE A JEDEC PACKAGE OUTLINE MO-220
VARIATION (WGGD-X)—TO BE APPROVED
2. DRAWING NOT TO SCALE
3. ALL DIMENSIONS ARE IN MILLIMETERS
4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE
MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE
5. EXPOSED PAD SHALL BE SOLDER PLATED
6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION
ON THE TOP AND BOTTOM OF PACKAGE
660025fe
13