English
Language : 

LTP5902-IPR_15 Datasheet, PDF (1/32 Pages) Linear Technology – SmartMesh IP Network Manager 2.4GHz 802.15.4e Wireless Embedded Manager
LTP5901-IPR/LTP5902-IPR
Network Features
SmartMesh IP Network Manager
2.4GHz 802.15.4e
Wireless Embedded Manager
Description
n Complete Radio Transceiver, Embedded Processor,
and Networking Software for Forming a Self-Healing
Mesh Network
n SmartMesh® Networks Incorporate:
n Time Synchronized Network-Wide Scheduling
n Per Transmission Frequency Hopping
n Redundant Spatially Diverse Topologies
n Network-Wide Reliability and Power Optimization
n NIST Certified Security
n SmartMesh Networks Deliver:
n >99.999% Network Reliability Achieved in the
Most Challenging RF Environments
n Sub 50µA Routing Nodes
n Compliant to 6LoWPAN Internet Protocol (IP) and
IEEE 802.15.4e Standards
LTP5901/2-IPR Features
n Manages Networks of Up to 32 Nodes (LTP5901/2-
IPRA) or Up to 100 Nodes (LTP5901/2-IPRB)
n Sub 1mA Average Current Consumption Enables
Battery Powered Network Management
n RF Modular Certification Include USA, Canada, EU,
Japan, Taiwan, Korea, India, Australia and New
Zealand
n PCB Assembly with Chip Antenna (LTP5901-IPR) or
with MMCX Antenna Connector (LTP5902-IPR)
SmartMesh IP™ wireless sensor networks are self man-
aging, low power internet protocol (IP) networks built
from wireless nodes called motes. The LTP™5901-IPR/
LTP5902-IPR is the IP manager product in the Eterna®*
family of IEEE 802.15.4e printed circuit board assembly
solutions, featuring a highly integrated, low power radio
design by Dust Networks® as well as an ARM Cortex-M3
32-bit microprocessor running Dust’s embedded Smart-
Mesh IP networking software.
Based on the IETF 6LoWPAN and IEEE-802.15.4e stan-
dards, the LTP5901/2-IPR runs SmartMesh IP network
management software to monitor and manage network
performance and provide a data ingress/egress point via
a UART interface. The SmartMesh IP software provided
with the LTP5901/2-IPR is fully tested and validated, and
is readily configured via a software application program-
ming interface. With Dust’s time-synchronized SmartMesh
IP networks, all motes in the network may route, source
or terminate data, while providing many years of battery
powered operation.
SmartMesh IP motes deliver a highly flexible network
with proven reliability and low power performance in an
easy-to-integrate platform.
L, LT, LTC, LTM, Linear Technology, Dust, Dust Networks, Eterna, SmartMesh and the
Linear logo are registered trademarks and LTP, SmartMesh IP and the Dust Networks logo are
trademarks of Linear Technology Corporation. All other trademarks are the property of their
respective owners. Protected by U.S. Patents, including 7375594, 7420980, 7529217, 7791419,
7881239, 7898322, 8222965.
* Eterna is Dust Networks’ low power radio SoC architecture.
Typical Application
EXPANDED VIEW
LTP5901-IPR
SENSOR
LTP5901/2-IPM
ANTENNA
IN+
LTC®2379-18 SPI
IN–
µCONTROLLER
UART
UART
HOST
APPLICATION
MOTE
For more information www.linear.com/LTP5901-IPR or www.linear.com/LTP5902-IPR
59012IPR TA01
59012iprf
1