LTP5901-IPM_15 Datasheet, PDF (1/32 Pages) Linear Technology – SmartMesh IP Node 2.4GHz 802.15.4e Wireless Mote Module

LTP5901-IPM/LTP5902-IPM
SmartMesh IP Node 2.4GHz
802.15.4e Wireless Mote Module
Network Features
n _{Complete Radio Transceiver, Embedded Processor,}
and Networking Software for Forming a Self-Healing
Mesh Network
n _SmartMesh^® _{Networks Incorporate:}
n _{Time Synchronized Network-Wide Scheduling}
n _{Per Transmission Frequency Hopping}
n _{Redundant Spatially Diverse Topologies}
n _{Network-Wide Reliability and Power Optimization}
n _{NIST Certified Security}
n _{SmartMesh Networks Deliver:}
n _{>99.999% Network Reliability Achieved in the}
Most Challenging RF Environments
n _{Sub 50µA Routing Nodes}
n _{Compliant to 6LoWPAN Internet Protocol (IP) and}
IEEE 802.15.4e Standards
LTP5901-IPM/LTP5902-IPM
Features
n _{Industry-Leading Low Power Radio Technology With:}
n _{4.5mA to Receive a Packet}
n _{5.4mA to Transmit at 0dBm}
n _{9.7mA to Transmit at 8dBm}
n _{RF Modular Certification Include USA, Canada, EU,}
Japan, Taiwan, Korea, India, Australia and New Zealand
n _{PCB Assembly with Chip Antenna (LTP5901-IPM) or}
with MMCX Antenna Connector (LTP5902-IPM). QFN
Version (LTC^®5800-IPM) Available
Description
SmartMesh IP™ wireless sensor networks are self man-
aging, low power Internet Protocol (IP) networks built
from wireless nodes called motes. The LTP™5901-IPM/
LTP5902-IPM is the IP mote product in the Eterna^®* family
of IEEE 802.15.4e printed circuit board assembly solutions,
featuring a highly-integrated, low power radio design by
Dust Networks^® as well as an ARM Cortex-M3 32-bit
microprocessor running Dust’s embedded SmartMesh IP
networking software. Both the LTP5901-IPM (with chip
antenna), at 24mm × 42mm, and the LTP5902-IPM (with
MMCX connector), at 24mm × 37mm, are designed for
surface mount assembly.
With Dust’s time-synchronized SmartMesh IP networks,
all motes in the network may route, source or terminate
data, while providing many years of battery powered
operation. The SmartMesh IP software provided with the
LTP5901-IPM/LTP5902-IPM is fully tested and validated,
and is readily configured via a software Application Pro-
gramming Interface.
SmartMesh IP motes deliver a highly flexible network
with proven reliability and low power performance in an
easy-to-integrate platform.
L, LT, LTC, LTM, Linear Technology, the Linear logo, Dust, Dust Networks, SmartMesh and
Eterna are registered trademarks and LTP, the Dust Networks logo and SmartMesh IP are
trademarks of Linear Technology Corporation. All other trademarks are the property of their
respective owners. Protected by U.S. Patents, including 7375594, 7420980, 7529217, 7791419,
7881239, 7898322, 8222965.
* Eterna is Dust Networks’ low power radio SoC architecture.
Typical Application
LTP5901-IPM
SENSOR
IN+
LTC2379-18 SPI
IN–
UART
µCONTROLLER
LTP5901-IPR/
LTP5902-IPR
ANTENNA
UART
HOST
APPLICATION
For more information www.linear.com/LTP5901-IPM or www.linear.com/LTP5902-IPM
59012ipm TA01
59012ipmf
1