LTC690_1 Datasheet, PDF (1/18 Pages) Linear Technology – Microprocessor Supervisory Circuits

FEATURES
n _{Guaranteed Reset Assertion at VCC = 1V}
n _{1.5mA Maximum Supply Current}
n _{Fast (35ns Max) Onboard Gating of RAM Chip}
Enable Signals
n _{SO-8 and S16 Packaging}
n _{4.65V Precision Voltage Monitor}
n _{Power OK/Reset Time Delay: 50ms, 200ms}
or Adjustable
n _{Minimum External Component Count}
n _{1µA Maximum Standby Current}
n _{Voltage Monitor for Power-Fail}
or Low-Battery Warning
n _{Thermal Limiting}
n _{Performance Specified Over Temperature}
n _{Superior Upgrade for MAX690 Family}
APPLICATIONS
n _{Critical μP Power Monitoring}
n _{Intelligent Instruments}
n _{Battery-Powered Computers and Controllers}
n _{Automotive Systems}
LTC690/LTC691
LTC694/LTC695
Microprocessor
Supervisory Circuits
DESCRIPTION
The LTC^®690 family provides complete power supply
monitoring and battery control functions for microprocessor
reset, battery back-up, CMOS RAM write protection, power
failure warning and watchdog timing. A precise internal
voltage reference and comparator circuit monitor the power
supply line. When an out-of-tolerance condition occurs,
the reset outputs are forced to active states and the chip
enable output unconditionally write-protects external
memory. In addition, the RESET output is guaranteed to
remain logic low even with V_CC as low as 1V.
The LTC690 family powers the active CMOS RAMs with a
charge pumped NMOS power switch to achieve low drop-
out and low supply current. When primary power is lost,
auxiliary power, connected to the battery input pin, powers
the RAMs in standby through an efficient PMOS switch.
For an early warning of impending power failure, the LTC690
family provides an internal comparator with a user-defined
threshold. An internal watchdog timer is also available, which
forces the reset pins to active states when the watchdog
input is not toggled prior to a preset timeout period.
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear
Technology Corporation. All other trademarks are the property of their respective owners.
TYPICAL APPLICATION
V_IN ≥ 7.5V
+
10μF
LT^®1086-5
V_IN
V_OUT
ADJ
5V
+
100μF
51k
10k
0.1μF
3V
V_CC
V_OUT
LTC690/LTC691
LTC694/LTC695
V_BATT
RESET
PFO
PFI _GND WDI
MICROPROCESSOR RESET, BATTERY BACK-UP, POWER FAILURE
WARNING AND WATCHDOG TIMING ARE ALL IN A SINGLE CHIP
FOR MICROPROCESSOR SYSTEMS
POWER TO μP
0.1μF ^{CMOS RAM POWER}
μP
SYSTEM
μP RESET
μP NMI
I/O LINE
0.1μF 100Ω
690 TA01
RESET Output Voltage
vs Supply Voltage
5
T_A = 25°C
EXTERNAL PULL-UP = 10μA
4 ^VBATT ^{= 0V}
3
2
1
0
0
1
2
3
4
5
SUPPLY VOLTAGE (V)
690 TA02
690fe
1