|
LTC6906 Datasheet, PDF (1/12 Pages) Linear Technology – Micropower, 10kHz to 1MHz Resistor Set Oscillator in SOT-23 | |||
|
FEATURES
â Supply Current: 12µA at 100kHz
â <0.65% Frequency Accuracy (from 0°C to 70°C)
â Frequency Range: 10kHz to 1MHz
â One Resistor Sets the Oscillator Frequency
â Single Supply: 2.25V to 5.5V
â â40°C to 125°C Operating Temperature Range
â No Decoupling Capacitor Needed
â Start-Up Time Under 200µs at 1MHz
â First Cycle After Power-Up is Accurate
â 150⦠CMOS Output Driver
â Low Profile (1mm) SOT-23 (ThinSOTTM) Package
U
APPLICATIO S
â Low Cost Precision Programmable Oscillator
â Rugged, Compact Micropower Replacement for
Crystal and Ceramic Oscillators
â High Shock and Vibration Environments
â Portable and Battery-Powered Equipment
â PDAs and Cellular Phones
, LTC and LT are registered trademarks of Linear Technology Corporation.
ThinSOT is a trademark of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
LTC6906
Micropower, 10kHz to 1MHz
Resistor Set Oscillator
in SOT-23
DESCRIPTIO
The LTC®6906 is a precision programmable oscillator that
is versatile, compact and easy-to-use. Micropower opera-
tion benefits portable and battery-powered equipment. At
100kHz, the LTC6906 consumes 12µA on a 3.3V supply.
A single resistor programs the oscillator frequency over a
10:1 range with better than 0.5% initial accuracy. The
output frequency can be divided by 1, 3 or 10 to span a
100:1 total frequency range, 10kHz to 1MHz.
The LTC6906 is easily programmed according to this
simple formula:
â§10, DIV Pin = V +
ÆOUT
=
1MHz
N
â¢
â
ââ
100k
RSET
â
â â
,
N
=
â¨âª3,
â©âª1,
DIV Pin = Open
DIV Pin = GND
No decoupling capacitor is needed in most cases, yielding
an extremely compact solution occupying less than 20mm2.
Contact LTC Marketing for a version of the part with a
shutdown feature or lower frequency operation.
The LTC6906 is available in the 6-lead SOT-23 (ThinSOT)
package.
TYPICAL APPLICATIO
Micropower Clock Generator
NO DECOUPLING
CAPACITOR
NEEDED
LTC6906 10kHz TO 1MHz
2.25V TO 3.6V
V+ OUT
÷10
GND GRD
÷3
DIV SET
÷1
RSET
100k TO 1M
6906 TA01
Typical Supply Current vs Frequency
90
CL = 5pF
80 TA = 25°C
70
60
V+ = 3.6V
50
V+ = 2.25V
40
30
20
10
0
0 200 400 600 800 1000 1200
FREQUENCY (kHz)
6906 G04
6906fa
1
|
▷ |