English
Language : 

LTC4260_15 Datasheet, PDF (1/30 Pages) Linear Technology – Positive High Voltage Hot Swap Controller with I2C Compatible Monitoring
Features
n Allows Safe Board Insertion into Live Backplane
n 8-Bit ADC Monitors Current and Voltage
n I2C™/SMBus Interface
n Wide Operating Voltage Range: 8.5V to 80V
n High Side Drive for External N-Channel MOSFET
n Input Overvoltage/Undervoltage Protection
n Optional Latchoff or Autoretry After Faults
n Alerts Host After Faults
n Foldback Current Limiting
n Available in 24-Lead SO, 24-Lead Narrow
SSOP and 32-Lead (5mm × 5mm) QFN Packages
Applications
n Electronic Circuit Breakers
n Live Board Insertion
n Computers, Servers
LTC4260
Positive High Voltage
Hot Swap Controller with
I2C Compatible Monitoring
Description
The LTC®4260 Hot Swap™ controller allows a board to be
safely inserted and removed from a live backplane. Using
an external N-channel pass transistor, the board supply
voltage can be ramped up at an adjustable rate. An I2C
interface and onboard ADC allow monitoring of board
current, voltage and fault status.
The device features adjustable analog foldback current
limit with latch off or automatic restart after the LTC4260
remains in current limit beyond an adjustable time-out
delay.
The controller has additional features to interrupt the host
when a fault has occurred, notify when output power is
good, detect insertion of a load card and power-up in
either the on or off state.
L, LT, LTC, LTM, Burst Mode, Linear Technology and the Linear logo are registered trademarks
and Hot Swap is a trademark of Linear Technology Corporation. All other trademarks are the
property of their respective owners.
Typical Application
48V
SDA
SCL
ALERT
GND
BACKPLANE PLUG-IN
CARD
*DIODES INC. SMBT70A
3A, 48V Card Resident Application
49.9k
0.1µF
1.74k
0.010Ω FDB3632
10Ω 100k
6.8nF
+
CL
UV VDD SENSE GATE
SOURCE
*
2.67k OV
FB
SDAO
SDAI
SCL
ALERT
LTC4260
BD_PRST
ADIN
ON INTVCC
TIMER
GND GPIO
4260 TA01
0.1µF
68nF
VOUT
48V
43.5k
3.57k
24k
Power Up Waveforms
VIN
50V/DIV
IIN
2A/DIV
CL = 1000F
VOUT
50V/DIV
GPIO
5V/DIV
25ms/DIV
4260 TA02
For more information www.linear.com/LTC4260
4260fc
1