LTC4069-4.4 Datasheet, PDF (1/16 Pages) Linear Technology – Standalone 750mA Li-Ion Battery Charger in 2 × 2 DFN with NTC Thermistor Input

LTC4069-4.4
FEATURES
Standalone 750mA Li-Ion
Battery Charger in 2 × 2 DFN
with NTC Thermistor Input
DESCRIPTION
n _{Complete Linear Charger in 2mm × 2mm DFN}
Package
n _{C/10 Charge Current Detection Output}
n _{Timer Charge Termination}
n _{Charge Current Programmable Up to 750mA with}
5% Accuracy
n _{No External MOSFET, Sense Resistor or Blocking}
Diode Required
n _{NTC Thermistor Input for Temperature Qualified}
Charging
n _{Preset 4.4V Float Voltage with 0.6% Accuracy}
n _{Constant-Current/Constant-Voltage Operation with}
Thermal Feedback to Maximize Charge Rate
Without Risk of Overheating
n _{Charge Current Monitor Output for Gas Gauging}
n _{Automatic Recharge}
n _{Charges Single-Cell Li-Ion Batteries Directly from}
USB Port
n _{20μA Supply Current in Shutdown Mode}
n _{Soft-Start Limits Inrush Current}
n _{Tiny 6-Lead (2mm × 2mm) DFN Package}
APPLICATIONS
n _{Wireless PDAs}
n _{Cellular Phones}
n _{Portable Electronics}
, LT, LTC and LTM are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
Protected by U.S. Patents, including 6522118, 6700364.
The LTC^®4069-4.4 is a complete constant-current/
constant-voltage linear charger for high capacity single-cell
lithium-ion batteries with a 4.4V float voltage. The 2mm
× 2mm DFN package and low external component count
make the LTC4069-4.4 especially well-suited for portable
applications. Furthermore, LTC4069-4.4 is specifically
designed to work within USB power specifications.
The CHRG pin indicates when charge current has dropped
to ten percent of its programmed value (C/10). An
internal timer terminates charging according to battery
manufacturer specifications.
No external sense resistor or blocking diode is required due to
the internal MOSFET architecture. Thermal feedback regulates
charge current to limit the die temperature during high power
operation or high ambient temperature conditions.
When the input supply (wall adapter or USB supply) is
removed, the LTC4069-4.4 automatically enters a low current
state, dropping battery drain current to less than 1μA. With
power applied, LTC4069-4.4 can be put into shutdown mode,
reducing the supply current to less than 20μA.
The LTC4069-4.4 also includes automatic recharge, low-
battery charge conditioning (trickle charging), soft-start
(to limit inrush current) and an NTC thermistor input used
to monitor battery temperature.
The LTC4069-4.4 is available in a tiny 6-lead, low profile
(0.75mm) 2mm × 2mm DFN package.
TYPICAL APPLICATION
Standalone Li-Ion Battery Charger
V_IN
4.5V TO 5.5V
R_NOM
100k
R1
510Ω
R_NTC
1μF
100k
V_CC BAT
LTC4069-4.4
CHRG PROG
NTC GND
500mA
+
R_PROG
2k
4.4V
Li-Ion
BATTERY*
4069 TA01
*E.G. SANYO BATTERIES: UF553436T OR UF553450T
Complete Charge Cycle (1100mAh Battery)
550
4.5
500 ^{CONSTANT-CURRENT}
4.4
450
400
350 _CONSTANT-
300 ^VOLTAGE
4.3
CHRG
TRANSITION
4.2
4.1
4.0
250
3.9
200
3.8
150
100
50
0
0
3.7
CHARGE
3.6
V_CC = 5V
TERMINATION
3.5
R_PROG = 2K
3.4
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
TIME (HOURS)
4069 TA01b
406944fa
1