English
Language : 

LTC2903-1 Datasheet, PDF (1/16 Pages) Linear Technology – Precision Quad Supply Monitor in 6-Lead SOT-23
LTC2903-1
Precision Quad Supply
Monitor in 6-Lead SOT-23
FEATURES
s Ultralow Voltage Reset: VCC = 0.5V Guaranteed
s Monitor Four Inputs Simultaneously
3.3V, 2.5V, 1.8V, ADJ (LTC2903-A1)
5V, 3.3V, 2.5V, 1.8V (LTC2903-B1)
5V, 3.3V, 1.8V, –5.2V (LTC2903-C1)
s Guaranteed Threshold Accuracy: ±1.5% of
Monitored Voltage over Temperature
s 10% Undervoltage Monitoring
s Low Supply Current: 20µA Typical
s 200ms Reset Time Delay
s Active Low Open-Drain RST Output
s Power Supply Glitch Immunity
s Low Profile (1mm) SOT-23 (ThinSOTTM) Package
U
APPLICATIO S
s Multivoltage Systems
s Optical Networking Systems
s Cell Phone Base Stations
s Network Servers
DESCRIPTIO
The LTC®2903-1 monitors up to four supply voltages. The
common reset output remains low until all four inputs
have been in compliance for 200ms. Voltage thresholds
maintain ±1.5% accuracy over temperature (with respect
to the monitored voltage). The LTC2903-1 features an
open-drain RST output with a weak internal pullup.
Internal supply voltage (VCC) is generated from the greater
voltage on the V1, V2 inputs. The RST output is guaranteed
to sink at least 5µA (VOL = 0.15V) for V1, V2 or V3 down
to 0.5V and will typically conduct current down to 0V.
Quiescent current is 20µA typical, making the LTC2903-1
ideal for power conscious systems. The LTC2903-1 is
available in a 6-lead low profile (1mm) SOT-23 package.
, LTC and LT are registered trademarks of Linear Technology Corporation.
ThinSOT is a trademark of Linear Technology Corporation.
TYPICAL APPLICATIO
5V
3.3V
DC/DC
CONVERTER
2.5V
1.8V
SYSTEM
LOGIC
C1
0.1µF
C2
0.1µF
LTC2903-B1
V1
RST
GND
V4
V2
V3
2903 TA01
Low Voltage Reset Pull-Down Performance
vs External Pull-Up Current and Input Supply Voltage
0.10
VIN = V1 = V2 = V3
0.09
0.08
0.07
20µA
0.06
10µA
0.05
0.04
5µA
0.03
0.02
2µA
0.01
1µA
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
VIN, INPUT SUPPLY VOLTAGE (V)
2903 TA01b
29031f
1