LTC2487_15 Datasheet, PDF (1/34 Pages) Linear Technology – 16-Bit 2-/4-Channel ADC with PGA, Easy Drive and I2C Interface

LTC2487
FEATURES
16-Bit 2-/4-Channel DS ADC
with PGA, Easy Drive and
I²C Interface
DESCRIPTION
n _{Up to 2 Differential or 4 Single-Ended Inputs}
n _{Easy Drive™ Technology Enables Rail-to-Rail}
Inputs with Zero Differential Input Current
n _{Directly Digitizes High Impedance Sensors with}
Full Accuracy
n _{2-Wire I}²_{C Interface with 9 Addresses Plus One}
Global Address for Synchronization
n _{600nV RMS Noise}
n _{Programmable Gain from 1 to 256}
n _{Integrated High Accuracy Temperature Sensor}
n _{GND to VCC Input/Reference Common Mode Range}
n _{Programmable 50Hz, 60Hz or Simultaneous}
50Hz/60Hz Rejection Mode
n _{2ppm INL, No Missing Codes}
n _{1ppm Offset and 15ppm Full-Scale Error}
n _{2x Speed/Reduced Power Mode (15Hz Using Internal}
Oscillator and 80µA at 7.5Hz Output)
n _{No Latency: Digital Filter Settles in a Single Cycle,}
Even After a New Channel is Selected
n _{Single Supply 2.7V to 5.5V Operation (0.8mW)}
n _{Internal Oscillator}
n _{Tiny 4mm × 3mm DFN Package}
APPLICATIONS
n _{Direct Sensor Digitizer}
n _{Direct Temperature Measurement}
n _{Instrumentation}
n _{Industrial Process Control}
The LTC^®2487 is a 4-channel (2 differential), 16-bit,
No Latency ∆S™ ADC with Easy Drive technology and a
2-wire, I²C interface. The patented sampling scheme elimi-
nates dynamic input current errors and the shortcomings
of on-chip buffering through automatic cancellation of
differential input current. This allows large external source
impedances and rail-to-rail input signals to be directly
digitized while maintaining exceptional DC accuracy.
The LTC2487 includes programmable gain, a high accuracy
temperature sensor and an integrated oscillator. This device
can be configured to measure an external signal (from com-
binations of 4 analog input channels operating in single-
ended or differential modes) or its internal temperature
sensor. The integrated temperature sensor offers 1/2°C
resolution and 2°C absolute accuracy. The LTC2487 can
be configured to provide a programmable gain from 1 to
256 in 8 steps.
The LTC2487 allows a wide common mode input range
(0V to V_CC), independent of the reference voltage. Any
combination of single-ended or differential inputs can
be selected and the first conversion, after a new channel
is selected, is valid. Access to the multiplexer output en-
ables optional external amplifiers to be shared between all
analog inputs and auto calibration continuously removes
their associated offset and drift.
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear
Technology Corporation. No Latency DS and Easy Drive are trademarks of Linear Technology
Corporation. All other trademarks are the property of their respective owners.
TYPICAL APPLICATION
Data Acquisition System with Temperature Compensation
2.7V TO 5.5V
CH0
CH1
4-CHANNEL
CH2
MUX
CH3
COM
TEMPERATURE
SENSOR
V_CC
0.1µF
10µF
IN⁺
REF⁺
16-BIT ∆Σ ADC SDA
WITH EASY-DRIVE _SCL
IN^–
REF^–
CA1
CA0
f_O
OSC
2487 TA01a
1.7k
2-WIRE
I²C INTERFACE
9-PIN SELECTABLE
ADDRESSES
Built-In High Performance Temperature Sensor
5
4
3
2
1
0
–1
–2
–3
–4
–5
–55 –30
–5 20 45 70
TEMPERATURE (°C)
95 120
2487 TA02
For more information www.linear.com/LTC2487
2487ff
1