LTC1663_15 Datasheet, PDF (1/12 Pages) Linear Technology – 10-Bit Rail-to-Rail Micropower DAC with 2-Wire Interface

FEATURES
n _{Micropower 10-Bit DAC in SOT-23}
n _{Low Operating Current: 60μA}
n _{Ultralow Power Shutdown Mode: 10μA}
n _{2-Wire Serial Interface Compatible}
with SMBus
n _{Selectable Internal Reference or Ratiometric to}
V_CC
n _{Maximum DNL Error: 0.75LSB}
n _{8 User Selectable Addresses (MSOP Package)}
n _{Single 2.7V to 5.5V Operation}
n _{Buffered True Rail-to-Rail Voltage Output}
n _{Power-On Reset}
n _{0.6V VIL and 1.4V VIH for SDA and SCL}
n _{Small 5-Lead SOT-23 and 8-Lead MSOP Packages}
APPLICATIONS
n _{Digital Calibration}
n _{Offset/Gain Adjustment}
n _{Industrial Process Control}
n _{Automatic Test Equipment}
n _{Arbitrary Function Generators}
n _{Battery-Powered Data Conversion Products}
LTC1663
10-Bit Rail-to-Rail
Micropower DAC with
2-Wire Interface
DESCRIPTION
The LTC^®1663 is a 10-bit voltage output DAC with true
buffered rail-to-rail output voltage capability. It operates
from a single supply with a range of 2.7V to 5.5V. The
reference for the DAC is selectable between the supply
voltage or an internal bandgap reference. Selecting the
internal bandgap reference will set the full-scale output
voltage range to 2.5V. Selecting the supply as the reference
sets the output voltage range to the supply voltage.
The part features a simple 2-wire serial interface compat-
ible with SMBus that allows communication between many
devices. The internal data registers are double buffered to
allow for simultaneous update of several devices at once.
The DAC can be put in low current power-down mode for
use in power conscious systems.
Power-on reset ensures the DAC output is at 0V when
power is initially applied, and all internal registers are
cleared.
For I²C designs, please refer to the LTC1669.
L, LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other
trademarks are the property of their respective owners.
BLOCK DIAGRAM
4 (5)
V_CC
1.25V
BANDGAP
REFERENCE
REFERENCE
SELECT
10-BIT
DAC LATCH
MSOP
PACKAGE
ONLY
(6) AD0
(2) AD1
(3) AD2
COMMAND
LATCH
INPUT
LATCH
2-WIRE INTERFACE
SDA
SCL
1 (1)
5 (4)
NOTE: PIN NUMBERS IN PARENTHESES REFER TO THE MSOP PACKAGE
+
–
R
R
GND
2 (7)
V_OUT 3 (8)
1663 BD
Differential Nonlinearity (DNL)
1.0
0.8
V_REF = V_CC = 5V
T_A = 25°C
0.6
0.4
0.2
0
–0.2
–0.4
–0.6
–0.8
–1.0
0
28 156 384 512 640 768 896 1024
CODE
1663 TA01
1663fd
1