LTC1662_1 Datasheet, PDF (1/12 Pages) Linear Technology – Ultralow Power, Dual 10-Bit DAC in MSOP

FEATURES
s _{Ultralow Power: 1.5µA (Typ) ICC per DAC Plus}
0.05µA Sleep Mode for Extended Battery Life
s _{Tiny: Two 10-Bit DACs in an 8-Lead MSOP—}
Half the Size of an SO-8
s _{Wide 2.7V to 5.5V Supply Range}
s _{Double Buffered for Simultaneous DAC Updates}
s _{Rail-to-Rail Voltage Outputs Drive 1000pF}
s _{Reference Range Includes Supply for Ratiometric}
0V-to-V_CC Output
s _{Reference Input Impedance Is Code-Independent}
(7.1MΩ Typ)—Eliminates External Buffers
s _{3-Wire Serial Interface with}
Schmitt Trigger Inputs
s _{Differential Nonlinearity: ±0.75LSB Max}
U
APPLICATIO S
s _{Mobile Communications}
s _{Portable Battery-Powered Instruments}
s _{Remote or Inaccessible Adjustments}
s _{Digitally Controlled Amplifiers and Attenuators}
s _{Factory or Field Calibration}
LTC1662
Ultralow Power, Dual
10-Bit DAC in MSOP
DESCRIPTIO
The LTC^®1662 is an ultralow power, fully buffered volt-
age output, dual 10-bit digital-to-analog converter (DAC).
Each DAC channel draws just 1.7µA (typ) total supply-
plus-reference operating current, yet is capable of sup-
plying DC output currents in excess of 1mA and reliably
driving capacitive loads of up to 1000pF. A program-
mable Sleep mode further reduces total operating cur-
rent to 0.05µA.
Linear Technology’s proprietary, inherently monotonic
architecture provides excellent linearity and an exception-
ally small external form factor. The double-buffered input
logic provides simultaneous update capability and can be
used to write to the DACs without interrupting Sleep mode.
With its tiny operating current and exceptionally small
size, the LTC1662 is ideal for use in the most power-
constrained products. For most designs, there is no
perceptible impact on the power budget; the LTC1662
draws many times less current than even a trimpot, while
providing buffered, low impedance (0.5Ω typical,
V_CC = 5V) rail-to-rail outputs.
The LTC1662 is pin and software compatible with the
LTC1661 dual, 60µA 10-bit DAC. It is available in 8-pin
MSOP and PDIP packages and is specified over the
industrial temperature range.
, LTC and LT are registered trademarks of Linear Technology Corporation.
BLOCK DIAGRA
V_{OUT A}
GND
8
7
10-BIT
DAC A
V_CC
V_{OUT B}
6
5
10-BIT
DAC B
1
CS/LD
CONTROL
LOGIC
ADDRESS
DECODER
SHIFT REGISTER
2
3
SCK
SDI
4
REF
1662 BD
Total Supply-Plus-Reference
Operating Current
5.0
4.5
5.5V
4.0
4.5V
3.5
3.0
2.5
3.6V
2.0
V_CC = 2.7V
1.5
1.0
0.5
V_REF = V_CC
CODE = 1023
0
–55 –35 –15 5 25 45 65 85 105 125
TEMPERATURE (°C)
1662 G02
1