LTC1144_15 Datasheet, PDF (1/12 Pages) Linear Technology – Switched-Capacitor Wide Input Range Voltage Converter with Shutdown

Features
n _{Wide Operating Supply Voltage Range: 2V to 18V}
n _{Boost Pin (Pin 1) for Higher Switching Frequency}
n _{Simple Conversion of 15V to –15V Supply}
n _{Low Output Resistance: 120Ω Maximum}
n _{Power Shutdown to 8µA with SHDN Pin}
n _{Open Circuit Voltage Conversion Efficiency:}
99.9% Typical
n _{Power Conversion Efficiency: 93% Typical}
n _{Easy to Use}
Applications
n _{Conversion of 15V to ±15V Supplies}
n _{Inexpensive Negative Supplies}
n _{Data Acquisition Systems}
n _{High Voltage Upgrade to LTC1044 or 7660}
n _{Voltage Division and Multiplications}
n _{Automotive Applications}
n _{Battery Systems with Wall Adapter/Charger}
LTC1144
Switched-Capacitor
Wide Input Range
Voltage Converter
with Shutdown
Description
The LTC^®1144 is a monolithic CMOS switched-capacitor
voltage converter. It performs supply voltage conversion
from positive to negative from an input range of 2V to
18V, resulting in complementary output voltages of –2V to
–18V. Only two noncritical external capacitors are needed
for the charge pump and charge reservoir functions.
The converter has an internal oscillator that can be
overdriven by an external clock or slowed down when
connected to a capacitor. The oscillator runs at a 10kHz
frequency when unloaded. A higher frequency outside the
audio band can also be obtained if the Boost Pin is tied to
V⁺. The SHDN pin reduces supply current to 8µA and can
be used to save power when the converter is not in use.
The LTC1144 contains an internal oscillator, divide-by- two,
voltage level shifter, and four power MOSFETs. A special
logic circuit will prevent the power N-channel switch
substrate from turning on.
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear
Technology Corporation. All other trademarks are the property of their respective owners.
Typical Application
+
10µF
Generating –15V from 15V
LTC1144
1 _{BOOST V+} 8 _{15V INPUT}
2 _{CAP+ OSC} 7
3 _{GND SHDN} 6
4 _{CAP– VOUT} 5
–15V OUTPUT
10µF
1144 TA01
Output Voltage vs Load Current, V⁺ = 15V
–15
R_OUT = 56Ω
T_A = 25°C
–14
–13
–12
–11
–10
0
10
20
30
40
50
LOAD CURRENT (mA)
1144 TA02
For more information www.linear.com/LTC1144
1144fa
1