English
Language : 

LT6110_15 Datasheet, PDF (1/38 Pages) Linear Technology – Cable/Wire Drop Compensator
LT6110
Cable/Wire Drop
Compensator
Features
n Improve Voltage Regulation to a Remote Load by 10×
n Ideal for Resistor-Adjustable Voltage Regulators
n Gain Configurable with a Single Resistor
n High Side Current Sensing:
Integrated 20mΩ Sense Resistor for Up to 3A
Ability to Use an External Sense Resistor
n 300µV Maximum Input Offset Voltage
n Output Current Accuracy of 1% Maximum
n 30µA Maximum Supply Current
n 2V to 50V Supply Range
n Fully Specified from –40°C to 125°C
n Available in Low Profile (1mm) ThinSOT™ and
(2mm × 2mm) DFN Packages
Applications
n Automotive and Industrial Power Distribution
n USB Power
n DC/DC Converters
n Plug-In DC Adapters
n Power over Ethernet
Description
The LT®6110 is a precision high side current sense with a
current mode output, designed for controlling the output
voltage of an adjustable power supply or voltage regulator.
This can be used to compensate for drops in voltage at
a remote load due to resistance in a wire, trace or cable.
The LT6110 monitors load current via a series-connected
internal or external sense resistor. Two current mode out-
puts, one sinking and one sourcing, are provided that are
proportional to the load current. This allows the LT6110 to
adjust the output voltage of a wide variety of regulators.
Either output may be used to monitor the load current.
Low DC offset allows for the use of a small sense resis-
tor, as well as precise control of small variations in wire
voltage drop.
L, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks
and ThinSOT is a trademark of Linear Technology Corporation. All other trademarks are the
property of their respective owners.
Typical Application
VIN IN
OUT VREG
REGULATOR
FB
GND
ILOAD
RIN
+IN V+
RS –IN
IOUT
LT6110
IMON V–
RWIRE
5V
VLOAD UNCOMPENSATED
5V
VLOAD COMPENSATED
2A
1A
ILOAD
200µs/DIV
VLOAD
REMOTE
LOAD
6110 TA01
For more information www.linear.com/LT6110
6110fa
1