|
LT5519_15 Datasheet, PDF (1/12 Pages) Linear Technology – 0.7GHz to 1.4GHz High Linearity Upconverting Mixer | |||
|
FEATURES
s Wide RF Frequency Range: 0.7GHz to 1.4GHz
s 17.1dBm Typical Input IP3 at 1GHz
s On-Chip RF Output Transformer
s On-Chip 50⦠Matched LO and RF Ports
s Single-Ended LO and RF Operation
s Integrated LO Buffer: â5dBm Drive Level
s Low LO to RF Leakage: â 44dBm Typical
s Noise Figure: 13.6dB
s Wide IF Frequency Range: 1MHz to 400MHz
s Enable Function with Low Off-State Leakage Current
s Single 5V Supply
s Small 16-Lead QFN Plastic Package
U
APPLICATIO S
s Wireless Infrastructure
s Cable Downlink Infrastructure
s Point-to-Point and Point-to-Multipoint Data
Communications
s High Linearity Frequency Conversion
LT5519
0.7GHz to 1.4GHz
High Linearity
Upconverting Mixer
DESCRIPTIO
The LT®5519 mixer is designed to meet the high linearity
requirements of wireless and cable infrastructure trans-
mission systems. A high speed, internally 50⦠matched,
LO amplifier drives a double-balanced mixer core, allow-
ing the use of a low power, single-ended LO source. An RF
output transformer is integrated, thus eliminating the
need for external matching components at the RF output,
while reducing system cost, component count, board area
and system-level variations. The IF port can be easily
matched to a broad range of frequencies for use in many
different applications.
The LT5519 mixer delivers +17.1dBm typical input 3rd
order intercept point at 1GHz with IF input signal levels of
â10dBm. The input 1dB compression point is typically
+5.5dBm. The IC requires only a single 5V supply.
, LTC and LT are registered trademarks of Linear Technology Corporation.
TYPICAL APPLICATIO
5VDC
1µF
1000pF
39nH
EN
VCC1 VCC2 VCC3
BPF
220pF 100â¦
BIAS
4:1
IF+
33pF
220pF
IF â
100â¦
LT5519
10pF
RF+
BPF
RF â
PA
(OPTIONAL)
LO INPUT
â5dBm
5pF
LO+
85â¦
5pF
LOâ
GND
5519 F01a
RF Output Power, IM3 and IM2
vs IF Input Power (Two Input Tones)
10
0
POUT
â10
â20
fRF = 1000MHz
â30 PLO = â5dBm
â40
fLO = 1140MHz
fIF1 = 140MHz
â50 fIF2 = 141MHz
IM3
TA = 25°C
â60
IM2
â70
â80
â90
â16 â12 â8
â4
0
4
IF INPUT POWER (dBm/TONE)
5519 F01b
Figure 1. Frequency Conversion in Wireless Infrastructure Transmitter
5519f
1
|
▷ |