English
Language : 

LT1813 Datasheet, PDF (1/12 Pages) Linear Technology – Dual 3mA, 100MHz, 750V/us Operational Amplifier
FEATURES
s 100MHz Gain Bandwidth
s 750V/µs Slew Rate
s 3.6mA Maximum Supply Current per Amplifier
s 8nV/√Hz Input Noise Voltage
s Unity-Gain Stable
s 1.5mV Maximum Input Offset Voltage
s 4µA Maximum Input Bias Current
s 400nA Maximum Input Offset Current
s 40mA Minimum Output Current, VOUT = ±3V
s ±3.5V Minimum Input CMR, VS = ±5V
s Specified at ±5V, Single 5V
s Available in MS8 and SO-8 Packages
U
APPLICATIO S
s Wideband Amplifiers
s Buffers
s Active Filters
s Video and RF Amplification
s Cable Drivers
s Data Acquisition Systems
LT1813
Dual 3mA, 100MHz, 750V/µs
Operational Amplifier
DESCRIPTIO
The LT®1813 is a low power, high speed, very high slew
rate operational amplifier with excellent DC performance.
The LT1813 features reduced supply current, lower input
offset voltage, lower input bias current and higher DC gain
than other devices with comparable bandwidth. The circuit
topology is a voltage feedback amplifier with the slewing
characteristics of a current feedback amplifier.
The output drives a 100Ω load to ±3.5V with ±5V supplies.
On a single 5V supply, the output swings from 1.1V to 3.9V
with a 100Ω load connected to 2.5V. The amplifier is stable
with a 1000pF capacitive load which makes it useful in
buffer and cable driver applications.
The LT1813 is manufactured on Linear Technology’s
advanced low voltage complementary bipolar process.
For higher supply voltage single, dual and quad opera-
tional amplifiers with up to 70MHz gain bandwidth, see the
LT1351 through LT1365 data sheets.
, LTC and LT are registered trademarks of Linear Technology Corporation.
TYPICAL APPLICATIO
4MHz, 4th Order Butterworth Filter
232Ω
232Ω
VIN
665Ω
220pF
–
47pF
1/2 LT1813
+
274Ω
274Ω 562Ω
470pF
–
22pF
1/2 LT1813
+
VOUT
1813 TA01
Filter Frequency Response
10
0
–10
–20
–30
–40
–50
–60
–70 VS = ±5V
–80 VIN = 600mVP-P
PEAKING < 0.12dB
–90
0.1
1
10
FREQUENCY (MHz)
100
1813 TA02
1