LT1194_15 Datasheet, PDF (1/12 Pages) Linear Technology – Video Difference Amplifier

FEATURES
s _{Differential or Single-Ended Gain Block: ±10 (20dB)}
s _{– 3dB Bandwidth: 35MHz}
s _{Slew Rate: 500V/µs}
s _{Low Cost}
s _{Output Current: ±50mA}
s _{Settling Time: 200ns to 0.1%}
s _{CMRR at 10MHz: 45dB}
s _{Differential Gain Error: 0.2%}
s _{Differential Phase Error: 0.08°}
s _{Input Amplitude Limiting}
s _{Single 5V Operation}
s _{Drives Cables Directly}
U
APPLICATIO S
s _{Line Receivers}
s _{Video Signal Processing}
s _{Gain Limiting}
s _Oscillators
s _{Tape and Disc Drive Systems}
LT1194
Video Difference
Amplifier
DESCRIPTIO
The LT^®1194 is a video difference amplifier optimized for
operation on ±5V and a single 5V supply. The amplifier has
a fixed gain of 20dB and features adjustable input limiting
to control tough overdrive applications. It has uncommit-
ted high input impedance (+) and (–) inputs, and can be
used in differential or single-ended configurations.
The LT1194’s high slew rate 500V/µs, wide bandwidth
35MHz, and ±50mA output current make it ideal for
driving cables directly. This versatile amplifier is easy to
use for video or applications requiring speed, accuracy
and low cost.
The LT1194 is available in 8-pin PDIP and SO packages.
, LTC and LT are registered trademarks of Linear Technology Corporation.
TYPICAL APPLICATIO
Wideband Differential Amplifier
with Limiting
250Ω
7pF TO 45pF
1
INPUT
14
4 _{11 5V}
8
NE592
7
–5V
1µF
1µF
1k
A_V = 1000, –3dB BW = 35MHz
5V
3₊
7
2 _{– LT1194}
6
OUTPUT
5₊
1
1k
4
8
–5V
V_CONTROL
LT1194 • TA01
Sine Wave Reduced by Limiting
V_OUT
1V/DIV
LT1193 • TA02
200kHz SINE WAVE WITH V_CONTROL = –5V, –4V, –3V, –2V
1