LT1192_01 Datasheet, PDF (1/12 Pages) Linear Technology – Ultrahigh Speed Operational Amplifier

FEATURES
s _{Gain Bandwidth Product, AV = 5: 350MHz}
s _{Slew Rate: 450V/µs}
s _{Low Cost}
s _{Output Current: ±50mA}
s _{Settling Time: 90ns to 0.1%}
s _{Differential Gain Error: 0.1% (RL = 1k)}
s _{Differential Phase Error: 0.01° (RL = 1k)}
s _{High Open-Loop Gain: 100V/mV Min}
s _{Single Supply 5V Operation}
s _{Output Shutdown}
U
APPLICATIO S
s _{Video Cable Drivers}
s _{Video Signal Processing}
s _{Photo Diode Amplifier}
s _{Pulse Amplifiers}
s _{D/A Current to Voltage Conversion}
TYPICAL APPLICATIO
Double Terminated Cable Driver
5V
3₊
7
6
LT1192
2_–
4
100Ω
–5V
910Ω
75Ω ^CABLE
75Ω
–3dB BANDWIDTH = 55MHz
LT1192 • TA01
LT1192
Ultrahigh Speed
Operational Amplifier
DESCRIPTIO
The LT1192 is a video operational amplifier optimized for
operation on ±5V and a single 5V supply. Unlike many
high speed amplifiers, this amplifier features high open-
loop gain, over 100dB, and the ability to drive heavy loads
to a full-power bandwidth of 20MHz at 7V_P-P. In addition
to its very fast slew rate, the LT1192 has a high gain
bandwidth of 350MHz and is compensated for a closed-
loop gain of 5 or greater.
Because the LT1192 is a true operational amplifier, it is an
ideal choice for wideband signal conditioning, active fil-
ters, and applications requiring speed, accuracy and low
cost.
The LT1192 is available in 8-pin PDIP and SO packages
with standard pinouts. The normally unused Pin 5 is used
for a shutdown feature that shuts off the output and
reduces power dissipation to a mere 15mW.
, LTC and LT are registered trademarks of Linear Technology Corporation.
Inverter Pulse Response
A_V = – 5, C_L = 10pF SCOPE PROBE
LT1192 • TA02
1