LT1085CT-33 Datasheet, PDF (1/12 Pages) Linear Technology – 3A, 5A, 7.5A Low Dropout Positive Fixed Regulators

LT1083/LT1084/LT1085 Fixed
3A, 5A, 7.5A Low Dropout
Positive Fixed Regulators
FEATURES
■ _{Three-Terminal 3.3V, 3.6V, 5V and 12V}
■ _{Output Current of 3A, 5A or 7.5A}
■ _{Operates Down to 1V Dropout}
■ _{Guaranteed Dropout Voltage at Multiple Current Levels}
■ _{Line Regulation: 0.015%}
■ _{Load Regulation: 0.1%}
■ _{100% Thermal Limit Functional Test}
■ _{Adjustable Versions Available}
U
APPLICATIO S
■ _{High Efficiency Linear Regulators}
■ _{Post Regulators for Switching Supplies}
■ _{Constant Current Regulators}
■ _{Battery Chargers}
DEVICE
OUTPUT CURRENT*
LT1083
LT1084
LT1085
7.5 Amps
5.0 Amps
3.0 Amps
*For a 1.5A low dropout regulator see the LT1086 data sheet.
DESCRIPTIO
The LT^®1083 series of positive adjustable regulators are
designed to provide 3A, 5A and 7.5A with higher efficiency
than currently available devices. All internal circuitry is
designed to operate down to 1V input to output differential
and the dropout voltage is fully specified as a function of
load current. Dropout is guaranteed at a maximum of 1.5V
at maximum output current, decreasing at lower load
currents. On-chip trimming adjusts the output voltage to
1%. Current limit is also trimmed, minimizing the stress
on both the regulator and power source circuitry under
overload conditions.
The LT1083 series devices are pin compatible with older
three-terminal regulators. A 10μF output capacitor is
required on these new devices; however, this is usually
included in most regulator designs.
Unlike PNP regulators, where up to 10% of the output
current is wasted as quiescent current, the LT1083 quies-
cent current flows into the load, increasing efficiency.
, LT, LTC and LTM are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
TYPICAL APPLICATIO
5V, 7.5A Regulator
V_IN ≥ 6.5V
+
10μF
LT1083-5
5V AT 7.5A
+ _22μF*
TANTALUM
*REQUIRED FOR STABILITY
LT1083/4/5 TA01
Dropout Voltage vs Output Current
2
1
0
0
I_FULLLOAD/2
I_FULLLOAD
OUTPUT CURRENT (A)
1083/4/5 TA02
1083ffd
1