LT1015 Datasheet, PDF (1/4 Pages) Linear Technology – High Speed Dual Line Receiver

FEATURES
s _{Response Time: 10ns}
s _{Setup Time for Latch: 2ns}
s _{Operates on Single 5V Supply}
s _{Dual Function in 8-Pin Package}
s _{No Input Slew Rate Requirement}
s _{Latch Function Included on Chip}
s _{True Differential Inputs}
U
APPLICATIONS
s _{High Speed Differential Line Receiver}
s _{Pulse Height/Width Discriminator}
s _{Timing and Delay Generators}
s _{Analog to Digital Interface}
TYPICAL APPLICATION
LT1015
High Speed
Dual Line Receiver
DESCRIPTION
The LT ^®1015 is a dual high speed comparator intended for
line receiver and other general purpose fast comparator
functions. It has 10ns response time, true differential
inputs, TTL outputs and operates from a single 5V supply.
A unique output stage design virtually eliminates power
supply glitching during transitions. This greatly reduces
instability and crosstalk problems in multiple line applica-
tions. No minimum input slew rate is required as in
previous TTL output comparators.
The LT1015 has a true Latch pin for retaining output data.
Setup time is 2ns, allowing the comparators to capture
data much faster than the actual flowthrough response
time. 8-pin miniDIP and ceramic packages allow high
packing density.
, LTC and LT are registered trademarks of Linear Technology Corporation.
BLOCK DIAGRAM
2-Channel 20MHz Clocked Line Receiver
INPUT A
INPUT B
+
1/2
LT1015
–
+
1/2
LT1015
–
5V
CHANNEL A
CLOCK
DATA LATCHED
ON POSITIVE EDGE
CHANNEL B
1015 • TA01
INPUT A
REFERENCE
INPUT
INPUT B
V⁺
+
1/2
LT1015
–
–
1/2
+^LT1015
OUTPUT A
LATCH (BOTH SIDES)
DEVICE ACTIVE WITH
LATCH LOW. “OPEN”
GOES TO HIGH STATE
OUTPUT B
1015 • BD
1