|
LND3526 Datasheet, PDF (1/7 Pages) Linear Dimensions Semiconductor – DUAL USB POWER CONTROL SWITCH | |||
|
DATA SHEET
LND 3526
DUAL USB POWER CONTROL SWITCH
GENERAL DESCRIPTION
The LND3526, is a dual high side power control
switch, with independent enable and flag
functions optimized for self powered and bus-
powered universal serial bus (USB) applications.
The LND3526 satisfies the following USB
requirements: Each switch channel supplies up
to 500mA with internal circuitry limiting the fault
current to 750mA. The switchâs 140m⦠on-
resistance meets USB voltage drop
requirements. A flag output is available to
indicate fault conditions to the local USB
controller.
Additional features include: lockout (UVLO) to
ensure that the device remains off until there is a
valid input voltage present, thermal shutdown to
prevent switch failure from high current loads
and 3.3V and 5V logic compatible enable inputs.
The LND3526 is available in active-high and
active-low versions in 8-pin die and SOIC
packages.
FEATURES
⢠USB specification compliant
⢠Over-Current Protection
⢠2 independent switches
⢠140 m⦠maximum on-resistance
⢠Thermal shutdown
⢠5µA Maximum standby supply current
⢠2.4V typical under-voltage lockout
(UVLO)
⢠3V to 5.5V input
⢠Active-high or active-low ENABLE
versions
⢠Independent open drain fault flag pins
⢠500mA continuous load current per
switch
APPLICATIONS
⢠USB host and self powered hubs
⢠USB bus-powered hubs
⢠USB monitors, printers, cameras and
other USB controlled peripherals
⢠Hot plug-in power supplies
⢠Battery charger circuits
⢠Linear Dimensions, Inc. ⢠445 East Ohio Street, Chicago IL 60611 USA ⢠tel 312.321.1810 ⢠fax 312.321.1830 ⢠www.lineardimensions.com â¢
|
▷ |