DC1205A Datasheet, PDF (23/24 Pages) Linear Integrated Systems – 500mA Wide Input Voltage Range Step-Down LED Driver with 10:1 Dimming

LT3592
PACKAGE DESCRIPTION
MSE Package
10-Lead Plastic MSOP
(Reference LTC DWG # 05-08-1664)
2.794 p 0.102
(.110 p .004)
BOTTOM VIEW OF
EXPOSED PAD OPTION
2.06 p 0.102
0.889 p 0.127
(.035 p .005)
1
(.081 p .004)
1.83 p 0.102
0.29
REF
(.072 p .004)
5.23
(.206)
MIN
2.083 p 0.102 3.20 – 3.45
(.082 p .004) (.126 – .136)
0.305 p 0.038
(.0120 p .0015)
TYP
0.50
(.0197)
BSC
RECOMMENDED SOLDER PAD LAYOUT
3.00 p 0.102
(.118 p .004)
(NOTE 3)
0.05 REF
DETAIL “B”
CORNER TAIL IS PART OF
DETAIL “B” THE LEADFRAME FEATURE.
10
FOR REFERENCE ONLY
NO MEASUREMENT PURPOSE
10 9 8 7 6
0.497 p 0.076
(.0196 p .003)
REF
0.254
(.010)
GAUGE PLANE
DETAIL “A”
0o – 6o TYP
4.90 p 0.152
(.193 p .006)
3.00 p 0.102
(.118 p .004)
(NOTE 4)
12345
0.53 p 0.152
(.021 p .006)
DETAIL “A”
1.10
(.043)
MAX
0.18
(.007)
SEATING
PLANE _{0.17 – 0.27}
NOTE:
1. DIMENSIONS IN MILLIMETER/(INCH)
(.007 – .011)
TYP
0.50
(.0197)
BSC
2. DRAWING NOT TO SCALE
3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX
0.86
(.034)
REF
0.1016 p 0.0508
(.004 p .002)
MSOP (MSE) 0908 REV C
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-
tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
3592fc
23