DC590A-1 Datasheet, PDF (2/9 Pages) Linear Integrated Systems – QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 590 USB SERIAL CONTROLLER FOR LINEAR TECHNOLOGY QUICKEVAL-TM DEMO BOARDS

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 590
USB SERIAL CONTROLLER FOR LINEAR TECHNOLOGY QUICKEVAL™ DEMO BOARDS
Figure 2. Basic Connection
QUICK START PROCEDURE
For proper equipment setup, follow the procedure be-
low:
1. Do not plug in DC590 before running the installation
program.
2. Download the QuickEval installation program from
http://www.linear.com/software/.
3. Run the QuickEval installation program and follow the
on-screen instructions.
NOTE: The QuickEval demo software requires a PC that
is running Windows 98 (or later), and has an available
USB port.
4. Connect the demonstration circuit to be evaluated to
DC590 using the supplied 14-conductor ribbon cable.
The demo software detects the circuit and starts the
appropriate control screen.
Each demonstration board also comes with a Quick Start
guide similar to this one. For usage details relevant to a
particular circuit refer to its Quick Start Guide.
2