LT1178_1 Datasheet, PDF (12/12 Pages) Linear Integrated Systems – 17uA Max, Dual and Quad, Single Supply, Precision Op Amps

LT1178/LT1179
PACKAGE DESCRIPTIO
S8 Package
8-Lead Plastic Small Outline (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1610)
.050 BSC
N
.245
MIN
12 3
.045 ±.005
.189 – .197
(4.801 – 5.004)
NOTE 3
8
7
6
5
N
.160 ±.005
.228 – .244
(5.791 – 6.197)
N/2
.150 – .157
(3.810 – 3.988)
NOTE 3
N/2
.030 ±.005
TYP _{RECOMMENDED SOLDER PAD LAYOUT}
1
2
34
.010
(0.254
–
–
.020
0.508)
×
45°
.008 – .010
(0.203 – 0.254)
0°– 8° TYP
.053 – .069
(1.346 – 1.752)
.004 – .010
(0.101 – 0.254)
.016 – .050
(0.406 – 1.270)
NOTE:
1. DIMENSIONS
IN
INCHES
(MILLIMETERS)
.014 – .019
(0.355 – 0.483)
TYP
2. DRAWING NOT TO SCALE
3. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
.050
(1.270)
BSC
SO8 0502
.030 ±.005
TYP
N
SW Package
16-Lead Plastic Small Outline (Wide .300 Inch)
(Reference LTC DWG # 05-08-1620)
.050 BSC .045 ±.005
.398 – .413
(10.109 – 10.490)
NOTE 4
16 15 14 13 12 11 10 9
N
.420
.325 ±.005
MIN
NOTE 3
.394 – .419
(10.007 – 10.643)
123
N/2
RECOMMENDED SOLDER PAD LAYOUT
.005
(0.127)
RAD MIN
.291 – .299
(7.391 – 7.595)
NOTE 4
.010
(0.254
–
–
.029
0.737)
×
45°
0° – 8° TYP
N/2
123 45678
.093 – .104
(2.362 – 2.642)
.037 – .045
(0.940 – 1.143)
.050
.009 – .013
(0.229 – 0.330)
NOTE 3
.016 – .050
(0.406 – 1.270)
NOTE:
1. DIMENSIONS
IN
INCHES
(MILLIMETERS)
(1.270)
BSC _{.014 – .019}
(0.356 – 0.482)
TYP
2. DRAWING NOT TO SCALE
3. PIN 1 IDENT, NOTCH ON TOP AND CAVITIES ON THE BOTTOM OF PACKAGES ARE THE MANUFACTURING OPTIONS.
THE PART MAY BE SUPPLIED WITH OR WITHOUT ANY OF THE OPTIONS
4. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
12 Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
[phone] ^● FAX: [phone] ^● www.linear.com
.004 – .012
(0.102 – 0.305)
S16 (WIDE) 0502
11789fb
LW/TP 1102 1K REV B • PRINTED IN USA
 LINEAR TECHNOLOGY CORPORATION 1991