LW010F1 Datasheet, PDF (22/24 Pages) Lineage Power Corporation – LC/LW010- and LC/LW015-Series Power Modules: 18 Vdc to 36 Vdc or 36 Vdc to 75 Vdc Inputs, 10 W and 15 W

LC/LW010- and LC/LW015-Series Power Modules:
18 Vdc to 36 Vdc or 36 Vdc to 75 Vdc Inputs, 10 W and 15 W
Data Sheet
March 27, 2008
Outline Diagram
Dimensions are in millimeters and (inches).
Tolerance: x.x ± 0.5 mm (0.020 in.); x.xx ± 0.38 mm (0.015 in.).
If slightly lower height is needed, the four standoffs can be dropped through holes on the user’s PWB. By dropping
the standoffs through the PWB, the module height will be decreased to 9.5 mm (0.375 in.) typical height.
Top View
50.8 (2.00)
25.4
(1.00)
-
-
LC015A
IN _{DC-DC Power Module}
OUT
IN:DC 18-36V, 1.1A
OUT:DC 5V, 3A
+
MADE IN USA
+
Side View
Bottom View
0.51
(0.020)
9.91
(0.39)
5.08
(0.200)
10.16
(0.400)
2.54
(0.100)
7.62
(0.300)
STANDOFF
DIAMETER 0.63 (0.025)
TYP, 4 PLACES
7.62 (0.300)
0.32 (0.0125)
TYP
15.2
(0.60)
2
1
3
20.32 (0.800)
27.9 (1.10)
10.16 (0.400)
MAX
5.84 (0.230)*
MIN
0.63 (0.025) x 0.63 (0.025)
SQUARE PIN,
ALL PLACES
4
12.7
(0.500) 24.77
5
(0.975)
6
* An optional short pin dimension is 2.8 mm ± 0.25 mm (0.110 in. ± 0.010 in.).
8-1329(C).b
Pin
1
2
3
22
Function
VI(–)
VI(+)
ON/OFF or SYNC (optional)
Pin is not present unless one of these
options is specified.
Pin
Function
4
VO(+) or VO1(+)
5
COMMON (dual outputs) or
TRIM (optional on single outputs)
Pin is not present on single outputs unless
option is specified.
Pin is always present on dual outputs.
6
VO(–) or VO2(–)
Lineage Power