QPW050A0F1 Datasheet, PDF (2/22 Pages) Lineage Power Corporation – 36-75Vdc Input; 1.2Vdc to 3.3Vdc Output

Data Sheet
March 27, 2008
QPW050/060 Series Power Modules; DC-DC converters
36-75Vdc Input; 1.2Vdc to 3.3Vdc Output
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in
excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect the device reliability.
Parameter
Input Voltage
Continuous
Transient (100ms)
Operating Ambient Temperature
(see Thermal Considerations section)
Storage Temperature
I/O Isolation Voltage (100% factory Hi-Pot tested)
Device
Symbol
Min
V_IN
-0.3
V_{IN, trans}
-0.3
All
T_A
-40
All
T_stg
-55
All
⎯
⎯
Max
80
100
85
125
1500
Unit
Vdc
Vdc
°C
°C
Vdc
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions.
Parameter
Operating Input Voltage
Maximum Input Current
(V_IN=0V to 60V, I_O=I_{O, max})
Inrush Transient
Input Reflected Ripple Current, peak-to-peak
(5Hz to 20MHz, 12μH source impedance; V_IN=0V to
75V, I_O= I_Omax ; see Figure 31)
Input Ripple Rejection (120Hz)
Device
Symbol Min
Typ
Max
Unit
V_IN
36
48
75
Vdc
I_IN,max
6
Adc
All
I²t
All
All
1
A²s
7
mAp-p
50
dB
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple standalone operation to an
integrated part of a sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included,
however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies
require a fast-acting fuse with a maximum rating of 15A (see Safety Considerations section). Based on the
information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a
lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information.
LINEAGE POWER
2