|
QPW025A0F41 Datasheet, PDF (1/14 Pages) Lineage Power Corporation – 36-75Vdc Input; 3.3Vdc Output Voltage; 25A Output Current | |||
|
Data Sheet
May 7, 2008
QPW025A0F41/QPW025F41-H DC-DC Converter Power Module
36- 75Vdc Input, 3.3Vdc Output and 25A Output Current
Applications
 Wireless Networks
 Optical and Access Network Equipment
 Enterprise Networks
 Latest generation ICâs (DSP, FPGA, ASIC)
and Microprocessor powered applications
Options
 Negative Remote On/Off Logic
 Auto-restart from Output overcurrent/voltage
and Over-temperature Protections
 Heat plate version (-H)
Features
 Delivers up to 25A Output current
 High efficiency â 92.5% at 3.3V full load
 Industry standard Quarter brick footprint
57.9mm x 36.8mm x 12.7mm (with base plate)
(2.28in x 1.45in x 0.5in)
 Low output ripple and noise
 2:1 Input voltage
 Input under voltage protection
 Output overcurrent/voltage protection
 Over-temperature protection
 Tightly regulated output
 Remote sense
 Adjustable output voltage (+10%/ -20%)
 Negative logic, Remote On/Off
 Auto restart after fault protection shutdown
 Wide operating temperature range (-40°C to 85°C)
 Meets the voltage insulation requirements for ETSI
300-132-2 and complies with and is Licensed for
Basic Insulation rating per EN 60950
 CE mark meets the 2006/95/EC directive§
 UL* 60950-1Recognized, CSAâ C22.2 No. 60950-1-
03 Certified, and VDEâ¡ 0805 (EN60950 3rd Edition)
Licensed
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
The QPW025A0F41 is a new open-frame DC/DC power module designed to provide up to 25A output current in an
industry standard quarter brick package. The converter uses synchronous rectification technology and open-frame
packaging techniques to achieve high efficiency reaching 92.5% at 3.3V full load.
* UL is a registered trademark of Underwriters Laboratories, Inc.
â CSA is a registered trademark of Canadian Standards Association.
â¡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment. All of the required procedures of end-use equipment should be followed.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS05-005 ver. 1.96
PDF name:qpw025a0f41_w-h_ds.pdf
|
▷ |