QBVW033A0B41Z Datasheet, PDF (1/15 Pages) Lineage Power Corporation – QBVW033A0B Series Power Modules; DC-DC Converters

Preliminary Data Sheet
January 21, 2011
QBVW033A0B Series Power Modules; DC-DC Converters
36-75V_dc Input; 12V_dc Output; 33A Output Current
BARRACUDA SERIES
RoHS
Compliant
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Servers and storage applications
 Networking equipment including Power over
Ethernet (PoE)
 Fan assemblies and other systems requiring a
tightly regulated output voltage
Options
 Negative Remote On/Off logic (1=option code,
factory preferred)
 Auto-restart after fault shutdown (4=option code,
factory preferred)
 Base plate option (-H=option code)
 Passive Droop Load Sharing (-P=option code)
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 High and flat efficiency profile – >95.5% at 12Vdc,
30% load to 100% output
 Wide Input voltage range: 36-75Vdc
 Delivers up to 33Adc output current
 Fully very tightly regulated output voltage
 Low output ripple and noise
 Industry standard, Quarter brick:
58.4 mm x 36.8 mm x 11.7 mm
(2.30 in x 1.45 in x 0.46 in)
 Constant switching frequency
 Positive Remote On/Off logic
 Output over current/voltage protection
 Over temperature protection
 Wide operating temperature range (-40°C to 85°C)
 UL* 60950-1 Recognized, CSA^† C22.2 No. 60950-1-
03 Certified, and VDE^‡ 0805:2001-12 (EN60950-1)
Licensed
 CE mark to 2006/96/EC directive^§
 Meets the voltage and current requirements for ETSI
300-132-2 and complies with and licensed for Basic
insulation rating per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE
802.3^¤ PoE standards
 ISO** 9001 and ISO14001 certified manufacturing
facilities
Description
The QBVW033A0B series of dc-dc converters are a new generation of DC/DC power modules designed to support
12Vdc intermediate bus applications where multiple low voltages are subsequently generated using point of load
(POL) converters, as well as other application requiring a tightly regulated output voltage. The QBVW033A0B series
operate from an input voltage range of 36 to 75Vdc and provide up to 33A output current at output voltages of 12Vdc
in an industry standard quarter brick. The converter incorporates digital control, synchronous rectification technology,
a fully regulated control topology, and innovative packaging techniques to achieve efficiency exceeding 96% at 12V
output. This leads to lower power dissipations such that for many applications a heat sink is not required. Standard
features include on/off control, output overcurrent and over voltage protection, over temperature protection, input
under and over voltage lockout.
The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. Built-
in filtering for both input and output minimizes the need for external filtering.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† _{CSA is a registered trademark of Canadian Standards Association.}
‡ _{VDE is a trademark of Verband Deutscher Elektrotechniker e.V.}
§ _{This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.}
Document No: pds10-018 ver 0.5
PDF Name: QBVW033A0B_PDS.pdf