MVT040A0X3-SRPHZ Datasheet, PDF (1/14 Pages) Lineage Power Corporation – 40A Analog Mega DLynxTM:

Advance Data Sheet
November 17, 2011
40A Analog Mega DLynx^TM: Non-Isolated DC-DC Power Modules
4.5Vdc –14.4Vdc input; 0.6Vdc to 2.0Vdc output; 40A Output Current
RoHS Compliant
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
 Industrial equipment
Vin+
Cin
VIN
PGOOD
VOUT
VS+
MODULE
SEQ
TRIM
ADDR0
RTUNE
CTUNE
RTrim
GND
ON/OFF
SIG_GND
SYNC GND VS-
RADDR0
Vout+
Co
Features
 Compliant to RoHS EU Directive 2002/95/EC (Z
versions)
 Compatible in a Pb-free or SnPb reflow
environment (Z versions)`+
 Wide Input voltage range (4.5Vdc-14.4Vdc)
 Output voltage programmable from 0.6Vdc to
2.0Vdc via external resistor
 Tunable Loop^TM to optimize dynamic output
voltage response
 Power Good signal
 Fixed switching frequency with capability of
external synchronization
 Output overcurrent protection (non-latching)
 Overtemperature protection
 Remote On/Off
 Ability to sink and source current
 Cost efficient open frame design
 Small size: 33.02 mm x 13.46 mm x 10.9 mm
(1.3 in x 0.53 in x 0.429 in)
 Wide operating temperature range [-40°C to
105°C]
 Ruggedized (-D) version able to withstand high
levels of shock and vibration
 UL* 60950-1 2^nd Ed. Recognized, CSA^† C22.2
No. 60950-1-07 Certified, and VDE^‡ (EN60950-
1 2^nd Ed.) Licensed
 ISO** 9001 and ISO 14001 certified
manufacturing facilities
Description
The 40A Analog Mega DLynx^TM power modules are non-isolated dc-dc converters that can deliver up to 40A of
output current. These modules operate over a wide range of input voltage (VIN = 4.5Vdc-14.4Vdc) and provide a
precisely regulated output voltage from 0.6Vdc to 2.0Vdc, programmable via an external resistor. Features include
remote On/Off, adjustable output voltage, over current and overtemperature protection. The module also includes
the Tunable Loop^TM feature that allows the user to optimize the dynamic response of the converter to match the load
with reduced amount of output capacitance leading to savings on cost and PWB area.
*UL is a registered trademark of Underwriters Laboratories, Inc.
†_{CSA is a registered trademark of Canadian Standards Association.}
‡ _{VDE is a trademark of Verband Deutscher Elektrotechniker e.V.}
** ISO is a registered trademark of the International Organization of Standards
Document No: DS11-016 ver. 0.2
PDF name: MVT040A0X.pdf